ENGLISH
38
Maintenance
◗ Always remove shaver from the charging
stand/Jet Clean System before cleaning
appliance.
◗ The charging stand/Jet Clean System and
shaver may be wiped clean using a damp cloth.
◗ Water from the tap should be on a warm
setting to clean any washable parts.
Note: DO NOT place or clean any parts of the
charging stand/Jet Clean System in a dishwasher.
Storage
◗ The shaver can be placed in the charging
stand/Jet Clean System for safe storage.
◗ If appliance will not be used for an extended
period of time, it is recommended that the
cleaning solution in the Jet Clean canister be
emptied out before storing.
◗ Be sure shaver is turned off. Remove cord
from outlet and charging stand or Jet Clean
System before storing in a safe, dry location
where it will not be crushed, banged, or
subject to damage.
◗ Do not wrap power cord around shaver/
charging stand or Jet Clean System when
storing.
◗ Store cord in a safe location where it will not
be cut or damaged.
◗ Do not place or store charging stand/Jet
Clean System where it can fall or be pulled
into a tub or sink, water or other liquid while
plugged in.
C
◗ If storing shaver in the charging stand, put the
Protective Cap on shaver to protect heads.
Assistance
◗ For assistance, visit our website:
www.philips.com/support or
call toll free 1-800-243-3050
◗ Online information is available 24 hours a day,
7 days a week.
ENGLISH
39