Advertisement
FIRST THINGS FIRST
Match the wide blade of the plug with the wide slot in the
outlet. Be sure to insert the plug completely.
STEP4: PLUC; IN THE VCR
STEP 5: TUNE THE T V
Tune the TV to the VCR viewing channel. The VCR viewing
channel is channel 3 or 4 or the TV's video input.
•
If you connect your VCR using the ANTENNA connectors with
RF coaxial cable, set the 3 CH. 4 switch to channel 3 or
channel 4-the channel you want to use on your TV.
•
If you connect your VCR using the AUDIOA/IDEO jacks with
audio/video cables, select the TV's video input to see the
signal. See the TV Owner's
Manual.
The first time you connect your VCR and turn it on, a menu
screen appears. This is the beginning of the QuickSet Guide
which helps you to set up specific features of the VCR. If you
choose not to use this Guide, you can set up each feature
individually.
Go to the next step to understand how to move through and
change items in the menu system.
STEP 6: TURN ON THE VCR
VCR Viewing Channel
When using the IN FROM ANT. and OUT
TO TV jacks to connect your VCR, tune
your TV to channel 3 or 4.
When using the AUDIO/VIDEO jacks to
connect your VCR, tune your TV to the
TV's video input.
V
5
Advertisement
