(If your source does not have a set of RCA outputs, you can use an adapter to connect from the headphone jack to the audio inputs on SnapMusic Studio 715.) If your source has an optical digital output you can use that to connect to the SnapMusic Studio 715.
Page 3
3. Connect the USB cable from SnapMusic Studio 715 to an available USB port on your PC or laptop. 4. Windows will automatically detect that a new hardware has been connected to the PC and installed the drivers. Drivers are built into every Windows version. Wait until the following message shown on your...
Chapter 2 : SnapMusic Studio 715 Software Installation The SnapMusic Studio 715 package comes with complete Windows software utilities. These utilities can be found on the CD-ROM in this package. During installation, it is highly recommended to disable any sub-programs. These include applications such as antivirus software and system monitoring applications.
2.2 Update Driver In Vista If you are using Windows Vista32, you’ll need to install an updated driver, please follow the following steps: Connect USB cable from your SnapMusic Studio 715 to your computer Insert the installation CD into the CD ROM device.
Page 6
In the screen, select “Driver Installation”. Select “Run” when you see the message shown as left Select “Allow” when you see the message shown as left.
After messages shown above, you will see the left message which means the driver is installing When you see the left message which means you’ve successfully installed the driver, please select “Yes” to restart the windows. 2.3 The Roxio Easy Media Creator 9 LE– MusicLab Application Installation Roxio Easy Media Creator 9 LE–...
Check if there is “USB Audio Device” in the list. Fig.1 2. How to uninstall SnapMusic Application? Ans: You can follow the steps (Start All Programs KWorld Multimedia Uninstall SnapMusic) to Uninstall. Please refer to Fig.2 Fig.2...
Need help?
Do you have a question about the SnapMusic Studio 715 and is the answer not in the manual?
Questions and answers