Page 2
DEAR CUSTOMER, THANK YOU FOR PURCHASING SNU:MEE. YOU CHOSE A MODERN WIRELESS MP3 PLAYER WITH AN INTEGRATED SOUND SYSTEM AND BABY MONITOR INCLUDING STATE-OF-THE-ART ENGINEERING AND FEATURES. IT’S EASY TO OPERATE, BUT PLEASE READ THIS MANUAL CAREFULLY AND NOTE THE SAFETY INSTRUCTIONS.
6.4.2. Firmware update via computer …………………....................7. Audio file transfer to snu:mee (and detetion) ………....…………………............... 7.1. Using the app to transfer (or delete) audio files to snu:mee …..…............. 7.2. Using a computer to transfer (or delete) audio files to snu:mee............
INTENDED USE snu:mee is designed to play back audio signals and to work as a baby monitor. It is intended for private use and is not meant for any commercial purposes. DANGERS FOR CHILDREN AND PEOPLE WITH LIMITED CAPABILITIES TO USE ELECTRONIC DEVICES Accessories, packing and wrapping materials are not intended to be used by children as toys.
Page 5
When foreign objects or liquids enter snu:mee, switch it off immediately. Do not switch it on again until it has dried off completely. snu:mee is not to be taken apart, modified or repaired. There is a danger of fire or electric shock.
3. THIS IS YOUR SNU:MEE Control LED Microphone Speaker Skip back/Previous song (press) Fast rewind (press and hold) Volume up Start playback/Pause Volume down Stop playback Skip/Next song (press) Fast forward (press and hold) Serial number Nonslip Base MAC address...
Page 7
Power adaptor (country specific) USB cable Power "ON" Volume unlimited Power "ON" Volume limited to 60 decibels max. Power "OFF" Safety cover Safety cover USB port Headphone output (stereo) Wi-Fi On/Off...
Switch on snu:mee by putting the switch at the bottom of the device in the ”ON“ position. Having swit- ched it to “On” gives you full control of the volume so that you can adjust it to your liking. snu:mee is fully operational as soon as you hear the theme tune sounding and you see that the signal LED in the middle of the star is completely off.
5.2. OPERATION WITH SMARTPHONE/ TABLET To operate snu:mee with a smartphone or tablet, you need the ”Baby Stars – rock2sleep” iOS or Android App. The app is available from the App Store and the Google Play Store for free.
“snu:mee Control“. The App will now establish a connection to snu:mee. This procedure may take a couple of minutes in rare cases, and you will then be able to see snu:mee’s currently active playlist on your smartphone or tablet.
1. - 3. (by entering the new IP address) again, choose the operating mode “Access Point“ and click on “Select” at the bottom of the page. Alternatively you can also reset snu:mee by means of the factory reset to the initial settings. This will preserve all previously saved content on snu:mee and all your songs will still be in place.
IMPORTANT! When performing an update, please connect snu:mee to a power source for the duration of the update. A firmware update will take about 5 minutes. During the firmware update, snu:mee’s white signal LED will flash in fast intervals. Afterwards, snu:mee will restart automatically. Do under no circumstances interrupt this procedure.
Once you choose to delete an audio file on snu:mee, you will not be able to restore it. If you want to get it back, you will need to transfer it from the media library of your smartphone, tablet or computers again.
9. FACTORY RESET TO RESTORE BASIC SETTINGS You can choose to put snu:mee back to its original factory settings. All the initial settings and configura- tions snu:mee had when you first un-boxed it will be reinstalled when performing a factory reset. A factory reset is a recommended thing to do in case snu:mee should not operate properly any more or if you have forgotten your access data.
Need help?
Do you have a question about the snu:mee and is the answer not in the manual?
Questions and answers