GE 29111 Series User Manual page 30

. Press the program/mute button to confirm. You will hear
a confirmation tone and the new area code shows in the
display.
NOTE: To restore the default setting to - - -, press
and release delete when SET AREA CODE shows in
the display.
Tone/Pulse
From the Handset Setup Menu:
1. Press the caller ID-volume ( 5 or 6) button to scroll to the
TONE PULSE sub-menu.
. Press program/mute button to enter the menu. TONE/
PULSE 41TONE 2PULSE shows in the display. The default
setting is "1 TONE".
. Use the touch-tone pad or caller ID-volume ( 5 or 6) to
enter 1 TONE or 2 PULSE.
. Press the program/mute button to confirm. You will hear a
confirmation tone and your selection shows in the display.
Registration
Your packaged handset(s) are pre-registered and ready to
use. It is not recommended that a handset be registered
again unless absolutely necessary.
From the Handset Setup Menu:
1. Press the caller ID-volume ( 6 or 5) button to scroll to the
REGISTRATION sub-menu.
0