Related Manuals for Walther LRF400
Summary of Contents for Walther LRF400
- Page 1 LRF400 Laser Range Finder 2.1301 LRF600 Laser Range Finder 2.1302 LRF1000 Laser Range Finder 2.1303 Operating instructions 3 - 9 Bedienungsanleitung 10 - 16 Mode d´emploi 17 - 23 Manual de instrucciones 24 - 30...
- Page 2 Safety instructions Sicherheitshinweise Consignes de sécurité Instucciones de seguridad Maintenance Pflege Entretien Cuidados Description Benennung Désignation des pièces Designacion Operation Bedienung Utilisation Reglaje...
-
Page 3: Safety Instructions
SAFETY INSTRUCTIONS CAUTION The color, surface finish, size and shape of the target all affect reflectivity and range. The brighter the color, the longer the range. Red is highly reflective, for example, and allows longer ranges than black color, which is the least reflective color. -
Page 4: Maintenance
Standard mode in rain: 60 m Accuracy under normal weather conditions: ± 1 m ± 0.1%, ± 1° Display: LCD Power source: single 3V (CR2) battery Maximum laser output: 33 W Laser wavelength: 905 nm LRF400 LRF600 LRF1000 Distance Distance Distance... - Page 5 DESCRIPTION Power ON / laser MODE button measurement Objektive Ocular Rubber eye Laser receiver lens (laser emission lens) Battery compartment MODE-button LRF800 LRF600 Horizontal distance Power ON / laser measurement...
-
Page 6: Battery Change
BATTERY CHANGE 1xCR2 Open battery compartment. Insert battery. Close battery compart- (Observe correct polarity!) ment. DISPLAY Reading Length Metres Degree Height Angle Yard Measurement Battery indicator quality... -
Page 7: Operation
ADJUSTING Engage the device. Turn the ocular until the target is in focus. Centre the target in the circle. The rubber eye cup can be folded down for eyeglass wearers. OPERATION The object to be measured should be targeted at the circle center Distance indicated with 3 digits. -
Page 8: Measurement Functions
MEASUREMENT FUNCTIONS Press ON to turn on device. MODE- button Press the MODE button briefly to select between different functions: measurement Power will be turned off automatically after 15 seconds of non-use LINE-OF-SIGHT DISTANCE MEASUREMENT Press ON for 3 seconds: Distance Distance in metres: To switch between measurement units,... -
Page 9: Height Measurement
MEASUREMENT FUNCTIONS HORIZONTAL DISTANCE MEASUREMENT Press MODE and change to horizontal distance mode, press ON for 3 seconds: Horizontal distance To switch between measurement units, press the MODE button and hold it for 3 seconds. HEIGHT MEASUREMENT Press the MODE button briefly: To switch between measurement units, press the MODE button and hold it for 3 seconds. - Page 10 LASER MAGNIFICATION CLASS We reserve the right to make color and design changes and technical improve- ments. No responsibility is accepeted for printing errors or incorrect information. Änderungen in Farbe und Design, sowie technische Verbesserungen, Druckfehler und Irrtum vorbehalten. Alle Angaben ohne Gewähr.
Need help?
Do you have a question about the LRF400 and is the answer not in the manual?
Questions and answers