Frequently Asked Questions - McIntire DH-10 Setup And Operation

Frequently Asked Questions

1. Where can I fi nd support and warranty information?
Support and warranty information is found on the warranty card. Warranty is limited to
original owner.
2. What is the recommended setting for the dehumidifi er?
The recommended Relative Humidity (RH) setting for the DH-10 is 60%.
3. Where is the best place to locate the dehumidifi er?
Locate the unit in the galley, berth, head or where the air is stagnant and may cause mold
or mildew to form (on a boat). Direct the exhaust of the unit toward the problem area is. DO NOT
operate the dehumidifi er or other electrical appliances in the bilge, engine room, or fuel storage
rooms where gasoline, deisel or other combustible vapors may accumulate. If using in a home,
bathrooms, laundry rooms, and basement crawl spaces are ideal locations for the dehumidifi er.
4. Who is the manufacturer?
DH-10 Dehumidifi ers are manufactured in the USA by McIntire Company, in Bristol, CT.
5. What kind of maintenance is required on the unit?
The DH-10 was designed to be maintenance free under normal operating conditions.
Occasionally, check the drain hose, drain base and evaporator coils as described in the cleaning
and maintenance section of this manual.
Pg. 7