Fujitsu C1320 User Manual page 32

4. Remove the memory module.
Displace the hook on each side from the
memory module. The memory module
comes up slightly. Pull the memory module
diagonally up to detach it from the slot.
5. Install a new memory module.
Insert the memory module diagonally into the
slot with the notch in the memory module
aligned with the projection on the connector.
Push memory module down until it clicks into
place.
Notch in the memory module
U s e r - I n s t a l l a b l e Fe a t u r e s
6. Attach the memory compartment cover.
Attach the cover removed in step 3.
After you have installed or remove a
memory module, check the memory
capacity of you notebook to verify that
the memory module is installed properly.
Memory
compartment
cover
21