Sony CAV-M1000ES Service Manual page 10

CAV-M1000ES
RF Remote Control
6
1 MUTING
Press to mute the audio.
2 VOLUME +/–
Press to adjust the volume.
3 SYSTEM OFF
Press to shut down the system.
Charging the internal battery
1
Attach the supplied ferrite core to the AC power
cord of the charger cradle, then wrap the AC
power cord twice around the ferrite core.
2
Connect the AC power cord of the charger cradle to
the wall outlet.
3
Place the RF Remote Control on the charger cradle.
The internal battery starts charging. It takes
approximately 16 hours for full charging. Charge for
considerable time when you use it for the first time.
3
2
To the wall outlet
10
MUTING
1
2
VOLUME
1
SYSTEM OFF
4 Cursor/ENTER
Press to control the source.
5 CHANNEL +/–
Press to control the source.
6 RS232C connector
Hook up a computer using the dedicated RS232C
cable.
Meaning of icons shown on the top of the
display window
Icon Meaning
Communication between the RF Remote Control and
the Main Unit is completed.
Communication between the RF Remote Control and
the Main Unit has been interfered with. Or the distance
from the RF Remote Control to the RF Antenna is way
too far.
c Place the RF Antenna closer to the RF Remote
Control.
c Avoid interference of metal objects such as a cabinet
between the RF Antenna and the RF Remote Control.
Other radio waves have been interfering.
c Move the RF Remote Control about 1 inch to the left
to the right or up or down. Doing so may solve the
problem.
Some kind of trouble has occurred.
Contact your nearest Sony dealer.
The internal battery is being charged on the charger
cradle.
The remaining power of the battery is low.
c Charge the battery by placing the RF Remote Control
on the charger cradle.
3
4
5
CHANNEL