Color Kinetics ColorBlast 6 User Manual page 3

IMPORTANT INFORMATION
Strobe Warning
There is some anecdotal evidence that strobe lighting may induce epileptic symptoms
in certain susceptible individuals, although no associated product warnings have been
issued by United States government according to the Food and Drug Administration.
If strobe lights are used, some international regulatory agencies 1 recommend keeping
flicker rates at or below four flashes per second (as less of the flicker-sensitive population
will then be at risk of an attack). This flicker rate applies only to the overall output of any
group of lights in direct view. However, when more than one strobe light is used, the
flashes should be synchronized. End users should also consider issuing a warning, alert-
ing audience or viewers to the presence of strobe lighting.
Temperature Monitoring
For protection from extreme temperatures, ColorBlast 6 has been designed with a tem-
perature monitoring feature. If operating temperatures rise to an unsafe level, a compen-
sation circuit is triggered and the ColorBlast 6 operation is interrupted causing the lights
to turn dull red. After 30 minutes the lights will auto-cycle and return to full intensity.
To prevent additional power shut-downs, determine the cause of the overheating and
correct the problem.
If any problems occur during usage, unplug the product immediately and call or email:
Color Kinetics Technical Support Group:
1-888-FULL RGB or 617-423-9999 or support@colorkinetics.com.
COLORBLAST 6 SPECIFICATIONS
16.7 million (24 bit) additive RGB colors
color range
Continuously variable intensity output range
High intensity power LEDs
source
10˚ clear lens, 22˚ ground lens
beam angle
Die Cast Aluminum in black or white finish
housing
Unified power and data cable
connectors
UL/cUL, CE
listings
IP66
protection rating
Color Kinetics data interface system
data interface
Color Kinetics full line of controllers or other DMX512
control
(RS485) compatible when using Color Kinetics power/
data supply
24VDC
power requirement
25W Max. at full intensity (full RGB)
power consumption
PDS-150e - Maximum of 6 fixtures per supply
power supply
PDS-60 24V - Maximum of 2 fixtures per supply
-40°F to 122°F (-40°C to 50°C) operating temperature
temperature range
-4°F to 122°F (-20°C to 50°C) starting temperature
LED SOURCE LIFE
In traditional lamp sources, lifetime is defined as the point at which 50% of the lamps
fail. This is also termed Mean Time Between Failure [MTBF]. LEDs are semiconductor
devices and have a much longer MTBF than conventional sources. However, MTBF is
not the only consideration in determining useful life. Color Kinetics uses the concept
of useful light output for rating source lifetimes. Like traditional sources, LED output
degrades over time (lumen depreciation) and this is the metric for SSL lifetime.
LED lumen depreciation is affected by numerous environmental conditions such as
ambient temperature, humidity, and ventilation. Lumen depreciation is also affected by
means of control, thermal management, current levels, and a host of other electrical
design considerations. Color Kinetics systems are expertly engineered to optimize LED
life when used under normal operating conditions. Lumen depreciation information is
based on LED manufacturers' source life data as well as other third party testing. Low
temperatures and controlled effects have a beneficial effect on lumen depreciation.
Overall system lifetime could vary substantially based on usage and the environment in
which the system is installed.
Temperature and effects will affect lifetime. Color Kinetics rates product lifetime using
lumen depreciation to 50% of original light output. When the fixture is running at room
temperature using a color wash effect, the range of lifetime is in the range of 80,000-
100,000 hours. This is LED manufacturers' test data. High output is defined as any LED
device that is 1/2 watt or above. For more detailed information on source life, please
see www.colorkinetics.com/lifetime.
WARRANTy
This product is sold pursuant to CK's Standard Terms and Conditions (the "T&Cs") which
may be found at http://colorkinetics.com/howtobuy/buy/terms and which contain
important provisions, including, among others, Limited Warranty, exclusions and limita-
tions on CK's liability for damages, and restrictions on the remedies that are available
to you.
1 Guide to Health, Safety and Welfare at Pop Concerts and Similar Events,
HMSO Publications (UK)