Attaching The Stand - Panasonic Viera TX-L32DT35E Operating Instructions Manual

Attaching the stand

Warning
Do not disassemble or modify the stand.
•
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any other TV and displays.
•
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the stand if it becomes warped or physically damaged.
•
If you use the stand while it is physically damaged, personal injury may result. Contact your nearest Panasonic dealer
immediately.
During set-up, make sure that all screws are securely tightened.
•
If insufficient care is taken to ensure screws are properly tightened during assembly, the stand will not be strong enough to
support the TV, and it might fall over and become damaged, and personal injury may result.
Ensure that the TV does not fall over.
•
If the TV is knocked or children climb onto the stand with the TV installed, the TV may fall over and personal injury may result.
Two or more people are required to install and remove the TV.
•
If two or more people are not present, the TV may be dropped, and personal injury may result.
Do not tilt the TV by placing
something between the stand
and the floor. TV may fall over and
become damaged, and personal
injury may result.
Assembly screw (4)
Securing the TV
Use the assembly screws to fasten securely.
•
Make sure that the screws are securely tightened.
•
Carry out the work on a horizontal and level surface.
•
Depending on the length of the screw driver you use, it is
difficult to tighten the two screws at the bottom. Make sure
all screws are securely tightened.
To prevent from falling, please secure the TV to the wall by using strong string or wire.
•
Put the strong string or wire through the hole
on the bottom rear of the TV as shown in the
illustration.
4
M4 × 30
Stand is very heavy. Please
handle with both hands as
shown in image.
Stand
•
TBL5ZX0173 (TX-L32DT35E)
•
TBL5ZX0172 (TX-L37DT35E)
Foam mat or thick soft cloth
Back of the TV