Related Manuals for QRS QRS-101
Summary of Contents for QRS QRS-101
-
Page 1: Operating Instructions
Quantronic Resonance System The Original QRS-101 Home Operating Instructions Edition 12.01 Edition 12.01... -
Page 2: Table Of Contents
To Call Up a Program from the Home Card The Mat Applicator M1 The Pillow Applicator K1 QRS – Dosage Guidelines Pillow Applicator 10 QRS Application Important Advice in Regard to QRS – 101 Cleaning and Care Maintenance Fault Finding List of Appliances and Accessories Technical Data Manufacturer’s Liability... -
Page 3: Key To The Symbols
Key to the Symbols Type(s Quantron Resonance System containing: Control unit Coil applicators (Mat Applicator M1 and Pillow Applicator K1) Description The control unit generates a variable (pulsating) magnetic field at the applicators (coil mat or pillow). Tested EC-guidelines for medical products, appendix IV – medical products 93/42 EC Symbols Attention: follow the accompanying documents... -
Page 4: Certified And Patented Worldwide
In its regulations, the World Health Organisation (WHO) considers a magnetic field strength of up to 100 micro-Tesla at 50Hz as safe. The Quantronic Resonance System (QRS) uses field strengths that are far below the WHO limit (on level 10 with approx. 30 micro-Tesla). -
Page 5: Function Of Equipment
Usage: The Quantronic Resonance System (QRS) has almost limitless applications because it works at the cellular level to “normalize” cellular dysfunction. It “vitalizes” the cells and, through improved ion transport, supports the metabolism of the cells. The process is patented worldwide (Patent No. 0594655). -
Page 6: Appliance Operation
Put the mains adaptor in a wall socket and the connecting plug into the socket marked 6V on the back of your QRS appliance. Now connect one or two applicators to the sockets Appl 1 and/or Appl 2. If only one applicator is to be connected, please use socket Appl 1 (standard socket). -
Page 7: Function Of The Keys
Function of the Keys ON/Program Switching on the appliance Selection of therapy program Basis, vital or relax Stop Finishing a program Switching off the appliance 1..10 Setting of signal strength and program start Setting 1 equals approx. 2.5ìTesla Setting 10 equals approx. 25ìTesla Sensitive Setting for sensitive signal strength and program start Signal strength approx. -
Page 8: The Control Unit
1 to 10 or Sensitive. The control unit automatically switches off after 8 minutes, unless it was individually programmed from 1 to 30 minutes. Treatment with the QRS magnetic field triggers positive effects on the human organism, which continue for up to 8 hours. -
Page 9: The Home Card
4 P r o g r a m 4 P r o g r a m The Home Card provided is a smart card that can be programmed by a QRS healthcare professional or by the user. Patient Card by a Healthcare Professional... -
Page 10: To Call Up A Program From The Home Card
To Call Up a Program from the Home Card Push the card, into the control unit. A programmable QRS card is automatically recognized by the switched-on control unit and the card type is displayed. - Page 11 +/- 10% tolerance: Setting Mat (ìT) Pillow (ìT) Sensitive Protection from Electro Smog During therapy the appliance ensures that electro smog cannot pollute the body and therefore degrade the therapy. Only QRS has this ability as this process is patented internationally.
-
Page 12: The Pillow Applicator K1
The Pillow Applicator K1 The Pillow applicator is used specifically for individual parts of the body, without stimulating the rest of the body. QRS – Dosage Guidelines Pillow Applicator QRS Application Information regarding the magnetic field strength settings is on page 9. -
Page 13: Important Advice In Regard To Qrs - 101
10. Correctly position the pillow applicator. 11. Combination therapies with light, heat, therapeutic exercise etc. are recommended. 12. QRS sneaking-in, (that is a slow increase of the field strength dose in the early stages of treatment) is recommended. Important Advice in Regard to QRS - 101... -
Page 14: Cleaning And Care
In the case of an increase in blood pressure, as has occasionally been observed in the initial stages of QRS treatment, lower the field strength by 1 to 2 levels, until the body gets used to QRS treatment. Possibly reduce the duration of therapy to 2 minutes and then gradually and slowly increase it again. -
Page 15: Maintenance
Pillow Applicator Do not immerse the pillow applicator in water! Clean with normal, mild household cleaner, eg. Palmolive. Be sure to keep sharp, pointed objects away from mat applicator or pillow applicator. Do not expose the system to direct sunlight and protect it from frost. Placing Mat under a Mattress The mat can be placed under a mattress which is not thicker than 20 cm. -
Page 16: Technical Data
All accessories have to be authorized by the manufacturer, especially the mains adaptor. Otherwise this warranty is void. The manufacturer reserves the right to modify the product at any time. Your QRS consultant will inform you about QRS optionals as well as current prices.