Panasonic TX-32F250A Operating Instructions Manual page 7

( General Operation)
---~ ---"..
6 oK Mute Button
~ Press this button to mute the sound completely. The "MUTE" symbol will appear. (Colour will
~ change to red.)
..1 ~ Recall Button
q Press the "Recall" button to display the current system status. Press again to cancel.
.~- ~~-
8 eI Off Timer Button
~ The TV set may be preset to switch to stand-by after a fixed period.
~ By pressing "OFF-Timer" button, you can select the preset time; either "15", "30", "45", "60",
"75" or "90" minutes.
15 ~30 ~45 ~60 ~75
LO_90~
~ Press the button to access previously viewed channel.
Present channel ~ml ~
.
.
being viewed ~j;!.J ~ Last vIewed channel
'
10 -Surround Sound Operation
~ On-screen display during surround mode
~ Type of Broadcast On-screen Display
Surround On
]
TV/AV mode.
Surround Off
~ 4:3 4 ~16:9
Notes:
.Simply press 11:1 to display mode information on the center left of the screen.
.16:9 picture has been used to illustrate all of the Aspect modes described in this section.
Mode Picture Explanation
~
4:3 will display a 4:3 picture at its standard 4:3 size
~
o without any stretching.
4:3 3
0 0
, 16:9 will display the picture at its maximum size but
~
o with slight stretching. Black stripes will be visible
16:9 ~ 9 down the top and bonom of the picture.
~o
_e.. --~_..
12 ~ How to use Favorite CH mode
~ Refer to page 15.
13 N Normal ( N ) Button ..
~ By pressing the Normal "N" button on the Remote Control while Picture or Sound Control
~ Function is displayed, the selected function will be changed to the Normal Mode.
Normalization will not occur if the function is not displayed when the "N" bunon is pressed.
The Normal mode is the factory preset condition. Returning to this original condition is called
"Normalization". 7