Pioneer DV-444 Operating Instructions Manual page 34

To create your own setting (3)
You can only adjust this setting if the [Component
Video] setting in the Video 1 menu is set to
[Progressive].
1
Use the cursor button (3) to select [Start]
then press ENTER.
Progressive Video Memory Select
Progressive Video Setup
2
Use the cursor button (∞) to select
[Progressive Video Setup] then press
ENTER.
Progressive Video Memory Select
Progressive Video Setup
3
Use the cursor buttons (2/3) to select the
setting to [On] or [Off].
DNR
Move
4
Use the cursor buttons (5/∞) to select the
setting to adjust.
You can adjust any or all of the following picture
quality factors:
DNR
Adjusts the amount of noise reduction (NR) applied
to the Y (brightness) component.
Sharpness
Adjusts the sharpness of the mid-frequency (less
detailed) elements in the picture.
Detail
Adjusts how sharp edges appear in the picture.
Chroma Delay
Compensates for misalingnment of the Y
(brightness) and the C (colour) components.
Gamma
Adjusts the brightness of the darker images in the
picture.
5
Use the cursor buttons (2/3) to adjust the
settings.
Adjust these while a disc is playing to see the effect
of changes immediately.
34
En
Off MAX
Select Check
ENTER DISPLAY
6
Repeat steps 4 and 5 to make adjustments
to other settings.
If you would like to save the settings in the player's
memory, be sure to select either [1], [2], or [3] in
the [Prog. Memory] setting to establish which
memory location to save the new settings in.
Please note that if you select a location where
settings have already been saved, the old settings
will be replaced by the new ones.
Prog. Memory
Move
ENTER
7
When you are finished making
adjustments, press ENTER to establish the
new settings.
To create your own setting (4)
You can only adjust this setting if the [Component
Video] setting in the Video 1 menu is set to
[Progressive].
1
Use the cursor button (3) to select [Start]
then press ENTER.
Progressive Video Memory Select
Progressive Video Setup
2
Use the cursor button (∞) to select
[Progressive Video Setup] and press
ENTER.
3
Press DISPLAY.
DNR
Sharpness
Detail
Chroma Delay
Gamma
Prog. Memory
4
Use the cursor buttons (5/∞) to select the
setting and use the cursor buttons (2/3)
to adjust the settings.
Adjust these while a disc is playing to see the effect
of changes immediately.
5
To memorize the setting, select [Prog.
Memory1, 2, 3], then press ENTER.
The previous setting will be erased.
Off 1 2 3
Select DISPLAY Check
Off max
soft fine
soft fine
+
–
– +
Off 1 2 3