SIGNAL FLOW •
distortion is caused by the circuit "clipping" the top and bottom from the audio waveform.
Diode clipper section
Control of this module is performed by following controls:
•
Preamp – Amplification of signal in Diode clipper.
•
Threshold – This is the nominal level of amplitude, above this the distortion of the signal occurs.
Shape – Depending on a chosen Clipping curve, this parameter changes its characteristics.
•
•
Clip – Clicking the display that shows Clipper's curve, we can switch between 6 available different curves:
Devastor Clipper's curves
4
BASIC MODULES