Upgrading Memory - Samsung R530 User Manual

Upgrading Memory

One or more memory modules are installed on the computer.
There are  memory slots and users can replace the installed memory or add new memory.
Before You Start!
 Replace or install new memory only after shutting the computer down completely. Do not replace or install memory when the
computer is in Sleep mode.
 Disconnect main power plug and remove the battery before continuing.
 To utilize the dual channel feature, using memory modules with the same specifications (of the same capacity and from the
same manufacturer) is recommended.
 Only use the same type of memory as specified in the Product Specification.
 You must use only memory modules with the specifications (DDR2 or DDR3) printed on the memory slot that appears when
you open the memory compartment cover at the bottom.
Adding a Memory Module
1
Remove the screw on the memory compartment
cover at the bottom of the computer using a screw
driver.
e.g)in the case of using DDR
2
Fixing Screw
90
Insert a new memory module into the memory slot at
an angle of approximately 30 degrees aligning it to
the angle of the memory slot.
Memory Slot