Samsung R530 User Manual page 77

4
Select Internet Protocol Version 4(TCP/IPv4)
from the list of Network Components and click
Properties.
 The Network Component name may differ
depending on the Operating System Installed.
 To add a network component, click Install in the
screen shown in the figure above. You can add
clients, services, and protocols.
5
Configure the IP settings.
When using DHCP, select Obtain an IP address
automatically. To use a static IP address, select
Use the following IP address, and set the IP
address manually.
When not using DHCP, ask your network administrator
for the IP address.
6
When you have completed the settings, click the OK
button.
The network settings have been completed.
77