Table of Contents
Advertisement
MODEL AGW-90C
High Pressure Washer
Operator Manual
Bj2009
Manufacturer: Zhejiang Anlu Cleaning Machinery Co., Ltd.
Address: 190 Ind.Rd.,Jinqing,L.Q.Area, Taizhou, 318058 Zhejiang, P.R.China.
Contents:
1. General Assembly Drawings-----------------------------------------------1
2. Technical Specifications-----------------------------------------------------1
3. Safety instruction--------------------------------------------------------------2
4. Explanation of safety labels-------------------------------------------------3
5. Operation------------------------------------------------------------------------3
6. Maintenance and cleaning--------------------------------------------------5
7. Transporting and Storage ---------------------------------------------------5
8. Troubleshooting guide--------------------------------------------------------6
9. Engine Operation--------------------------------------------------------------7
Advertisement
Table of Contents
Summary of Contents for Zhejiang AGW-90C
-
Page 1: Table Of Contents
MODEL AGW-90C High Pressure Washer Operator Manual Bj2009 Manufacturer: Zhejiang Anlu Cleaning Machinery Co., Ltd. Address: 190 Ind.Rd.,Jinqing,L.Q.Area, Taizhou, 318058 Zhejiang, P.R.China. Contents: 1. General Assembly Drawings-----------------------------------------------1 2. Technical Specifications-----------------------------------------------------1 3. Safety instruction--------------------------------------------------------------2 4. Explanation of safety labels-------------------------------------------------3 5. Operation------------------------------------------------------------------------3 6. -
Page 2: General Assembly Drawings
1. General Assembly Drawings Item Description （1）frame （2）gun （3）gasoline engine （4）rubber underlay （5）wheel （6）pump （7）high pressure hose （8）lifting eyes 2. Technical Specifications: Basic Specifications: Water Feed Pressure----------------------------------------2.0~10.0 bar (0.2MPa~1MPa) Water Temperature-------------------------------------------------------------------below 50℃ Gasoline Engine Specifications: Engine Model-------------------------------------------------------------------------------AL154F Engine Type------------------------------------------------------Forced Air Cooling, 4 Stroke Displacement--------------------------------------------------------------------------------87 cm³... -
Page 3: Safety Instruction
3. Safety instruction: The appliance is intended to clean cars, garden and roof etc. Never attempt to use power washers on or near any electrical outlets, fuse boxes, transformers, high voltage wires, etc. Severe electrical shock or death may occur. Never point nozzle at people or animals. KNOW YOUR PRESSURE WASHING EQUIPMENT 1. -
Page 4: Explanation Of Safety Labels
4. Explanation of safety labels Reading Keep bystanders Wear eye and Never point nozzle on or near any Guaranteed sound power instruction away ear protection electrical connections, electrical outlets or level: 101dB(A) manual carefully fixtures, etc. Severe electrical shock or before using the death may occur! Never point nozzle at machine... - Page 5 NOTE 1: Never pull the hose to move the unit. This could damage hose and/or pump inlet. NOTE 2: Water source must provide a minimum of 5 gallons per minute at 20 p.s.i. Inlet hose can connected to the water main with Max.
-
Page 6: Maintenance And Cleaning
6. Maintenance and Cleaning : When doing maintenance, you may be exposed to hot surfaces, water pressure, moving parts, or fire resulting in death. Before performing any maintenance or repair, disconnect power source, let engine cool down completely and release all water pressure. The engine contains flammable fuel. -
Page 7: Troubleshooting Guide
8. Troubleshooting guide PROBLEM CAUSE REMEDY Engine will not start. No fuel. Add fuel. Pressure buildup after initial use. Squeeze gun trigger to relieve pressure. Not started or chocked. Pull choke of engine 3 times. Spark plug wire not attached. Attach spark plug wire. -
Page 8: Engine Operation
9. ENGINE OPERATION SAFETY PRECAUTIONS You have to observe the descriptions indicated with this mark because they contain very important information to assure the safety. ―――――――――――――――― PROHIBITED ITEMS ―――――――――――――――― ● No person who does not understand the content of this manual should be allowed to operate the engine. ●... - Page 9 ―――――――――――――――――― CAUTIONS ―――――――――――――――――― ● Check frequently the parts used on the fuel line for cracks or leakage, and replace them if necessary. ● Remove dirt, grasses or other trash from the cooling fins and the cooling air inlet. (Make sure to stop the engine and the driven equipment before the cleaning.) ●...
- Page 10 INSPECTION BEFORE OPERATION THE ENGINE ――――――――――――――――――― FUEL ―――――――――――――――――――― Use unleaded gasoline with a pump octane rating of 86 or higher. Unleaded gasoline produces fewer engine and spark plug deposits and extends exhaust system life. ！ WARNING Gasoline is highly flammable and explosive, and you can be burned or seriously injured when refueling.
- Page 11 ――――――――――― INSPECTION OF RESPECTIVE SECTIONS ――――――――――― Make sure to inspect these sections before operating the engine Inspection of clogging Inspection of fuel ●Check the starter cover, around the muffler and ● Is sufficient quantity of oil reserved? cooling air inlet for trash or withered grasses trapped. ●...
- Page 12 METHODS OF STARTING AND STOPPING THE ENGINE ―――――――――――――― START ―――――――――――――― 1. Turn the engine switch to the “ON” side. 2．Turn the choke lever to the fully CLOSED position (at the mark). To start a cold engine, move the choke lever to the CLOSED position. To restart a warm engine, leave the choke lever in the OPEN position.
- Page 13 Concerning New Start System It can start even if it is pulled slower than normal. If the rope is pulled (vigorously) till it will not come out any more, it could damage the recoil mechanism. Do not disassemble the recoil. It is dangerous to disassemble the inside of recoil.
- Page 14 the muffler cover. ● Do not touch the ignition plug cap or high-voltage cord during operation. (There is risk of electric shock or physical injury.) ● Do not operate the engine with the muffler or air cleaner cover removed. ADJUSTING THE CARBURETOR Engine revolution speed is adjusted at the optimum condition before shipping from the factory.
- Page 15 ――――――― INSPECTION AND SERVICE BEFORE EACH OPERATION ――――――― Cleaning of air cleaner When the element is very dirty or when the oil has been used up making the element dry, after cleaning the element soak it in kerosene and strongly wring out the element with one hand.
- Page 16 ――――――――― INSPECTION AND SERVICE AT EVERY 50-HOUR ――――――――― SPARK PLUG SERVICE Recommended spark plug: F6RTC 1. Disconnect the spark plug cap, and remove any dirt from around the spark plug area. 2. Remove the spark plug with a spark plug wrench. 3.
- Page 17 LONG-TIME STORING When releasing the engine from operation for more than 30 days, it must be serviced and stored as follows with care to prevent the starting trouble or malfunction due to degeneration of fuel. 1. Drain the fuel from the fuel tank and start to run the engine till it is stopped due to use-up of fuel. 2.