84
Learning the Basics
Starting a program
To turn off the cursor control overlay, hold down the
and press
keyboard indicator panel goes out.
Starting a program
The easiest way to start a program is to double-click the name
of the file that contains the information you want to work on.
To find the file, use My Computer or Windows Explorer.
If you prefer to open the program first, you have four options:
❖
Double-click the program icon on your desktop
❖
Use the Start menu
❖
Use Windows Explorer to locate the program file
❖
Use the Run dialog box
The Windows
step-by-step instructions for starting a program from the Start
menu. See
Saving your work
Before you turn off the computer, save your work to the hard
disk drive.
NOTE
Many programs offer a feature that saves documents at
regular intervals, such as every 15 minutes. Check your
programs' documentation to see whether they have an
automatic save feature.
again. The cursor control mode light on the
F10
®
XP operating system tutorial chapter gives
"Lesson 6: Starting programs" on page
Always save your data even when you are using Standby
mode. If your battery fully discharges, your information will be
lost. Your computer can be configured to warn you when the
battery is running low. See
page
115.
"Setting battery alarms" on
key
Fn
133.