Network Settings; Data Settings - Kyocera SoHo User Manual

Select
3. Erase Contacts
Select to erase all contacts. A message
4. Yes
appears: "Erase ALL Contacts?"
Press to select
5.

Network settings

Switching between phone lines
Your phone can have two service accounts, or
phone lines, associated with it. Each phone line has
its own phone number.
When you are using one line, you cannot receive
calls from the other. It would be as if the phone
were "off" for that number. Your voicemail,
however, will still take messages. All contacts and
settings are shared for both lines.
You must first establish a second phone line
Note:
with your service provider. Once established, a
second phone number becomes available in the
menu for selection:
→
Select
1. Menu Settings
.
Set Phone Line
Select one of the two lines and press
2.
User Guide for the Kyocera SoHo Phone
.
to erase all contacts.
Yes
→ →
Network

Data Settings

Setting Com port speed
The Com Speed sets the data rate at which your
phone connects to a laptop or PC.
Select
1. Menu
Com Port Speed
Select the speed. The options are:
2.
115.2 kbps
There may be a higher charge for making
Note:
calls using high-speed data in areas where 1X
service is available. Check with your service
provider for details.
Setting the phone to receive data
or faxes
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. You cannot receive voice calls while
the phone is in data/fax mode. To receive data or
faxes, you must connect the phone to a laptop or PC
and switch the phone from voice mode to data/
fax mode.
.
To purchase a cable call (800) 349-4188
Note:
(U.S.A. only), (858) 882-1410, or visit
www.kyocera-wireless.com/store
Connect the phone to the laptop or PC.
1.
Set the Com speed.
2.
Select
3. Menu
Data/Fax Calls
→ →
Settings Accessories
.
(default), .
230.4 kbps
.
→ →
Settings Network
.
→
,
19.2 kbps
→
37