Removing Memory; General Rimm Memos - Asus P4T533-C User Manual

2.5.3 Removing Memory

To release a memory module, push both ejectors outward and pull the module
straight up and out of the RIMM sockets.
RIMM modules become extremely hot during operation. To reduce the
risk of personal injury from hot surfaces, allow the modules to cool off
before removing them.

2.5.4 General RIMM Memos

This motherboard supports 800MHz modules with the exception of NEC
800-45 series 800MHz RIMMS: the NEC 800-45 series modules do not
function if the 533MHz CPU FSB is being used.
16-bit 1066MHz RIMM Qualified Vendor List
The following table lists qualified memory modules that have been tested
and for use with this motherboard:
Vendor Model / Device Number
Samsung MR-18R1628AF1-CN9
Samsung MR-18R1624AF1-CN9
Samsung MR-16R1624DF0-CT9
Samsung MR-16R1628DF0-CT9
Samsung MR-16R162GDF0-CT9
• Use only the tested and qualified RIMMs listed above. Visit the
ASUS website for more updates and details about qualified vendors of
the 16-bit 1066MHz RIMMs for use on this motherboard.
• Due to Intel's 850E chipset limitation, this board can only support a
maximum of 64 memory devices for PC800 or 48 memory devices for
PC1066 Dual-Channel mode. Based on current 256MB memory chip
technology, the maximum total memory size for PC800 is 2GB and
1.5GB for PC1066. Both ECC and non-ECC RIMMs are supported.
• 512MB DRDRAM chip is not yet supported.
ASUS P4T533-C motherboard user guide
ECC / nonECC Type/Size/Device
ECC 1066 / 256MB / 8d
ECC 1066 / 128MB /4d
nonECC 1066 / 128MB /4d
nonECC 1066 / 256MB /8d
nonECC 1066 /512MB /16d
19