Table of Contents
Advertisement
Cleaning and Maintenance
CAUTION
To avoid the risk of property damage, DO NOT USE BRASS
CLEANERS OR ABRASIVE CLEANERS ON ANY BRASS PARTS. All
brass body parts should be wiped regularly with hot, soapy water and a
soft, clean cloth. When hot, soapy water will not do the job, use every
day household cleaners that are not abrasive.
Brass Parts
All special ordered brass parts are coated with an epoxy coating.
CAUTION
DO NOT use any cleaning agent with chlorine or chlorine compounds on
stainless steel finish. Chlorine and chlorine compounds are corrosive to
stainless steel.
Cleaning Chart
Material/Problem
Cleaning Products
Stainless steel/
Mild cleaners
Enamels
Hard water spots
Vinegar and water
and scales
Soft, non-abrasive cleaners
Plastic
Soap and water
(Control knob)
18
Directions
Sponge with cloth, then
rinse with clear water
and wipe dry.
Satisfactory for use on
all finishes.
Swab or wipe with cloth.
Rinse with clear water
and dry. Satisfactory for
use on all finishes.
Apply with damp
sponge or cloth.
Satisfactory for use on
all finishes if rubbing
is light. Rub in direction
of the polish lines.
Pull off knob. Wash but
DO NOT soak. Rinse
with water, dry and
replace on control.
Troubleshooting
Problem
Possible Cause and/or Remedy
Warming drawer will not
Drawer is not connected to electrical power:
function.
Have electrician check power circuit breaker,
wiring, and fuses.
19
Advertisement
Table of Contents
