Operation - Prem-I-Air PJ152NP User Manual

OPERATION

Ion and Photocatalyst(TiO2)
1. Ensure filter is unpacked and installed before operation.
(Refer to Installation Instructions Section).
Best performance:
We recommend that you operate your air cleaner 24 hours a day because indoor air can
be quickly contaminated by activity in a room, for example outside air, smoking, and other
air pollutants. While the air cleaner will not process all the air in a room, the more air
circulated through the filter, the more filtered air is returned to the room. Portable air
cleaners will be much more effective in rooms where all doors and windows are closed.
However, for best performance the air outlet slot should be kept clear, at least 1 meter
(three feet) in all directions.
2. Insert the main's plug into a suitable power socket.
3. Press the POWER button to turn your air cleaner ON, the fan will start at LOW speed.
To turn the air purifier OFF, press the POWER button again. When you turn your Air
Purifier on again the fan will operate at the last speed selected, unless the power was
disconnected.
4. Press the FAN SPEED button to select LOW, MEDIUM or HIGH speed.
5. Your Air Purifier can be turned off by the TIMER after 1, 4 or 8 hours by depressing the
TIMER button. There is an LED to show when the TIMER mode has been selected.
6. The ION and PHOTOCATALYST mode is selected by pressing the ION/TIO2 button.
In this mode your Air Purifier emits negative ions that enhance the air purification
efficiency and provide a fresh air feel to the air. In addition the PHOTOCATALYST mode
helps to prevent viruses, germs and microbes from circulating around the room.
The Control Panel glows BLUE when the ION and PHOTOCATALYST mode is turned on.
When these functions are turned off the control panel glows GREEN.
5
Light Show
Fan Speed
Green light when running without Ion / TiO2
Blue light when running Ion / TiO2
Timer
Power on/off