BioAxxis BD-1 Instruction Manual
  1. Manuals
  2. Brands
  3. BioAxxis Manuals
  4. Locks
  5. BD-1
  6. Instruction manual

BioAxxis BD-1 Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

PREFACE

Thank you for purchasing the BioAxxis® BD-1
fingerprint deadbolt.
Please read the documentation carefully before
installation & use. The manual details all
installation procedures and operation steps.
Manufacturer and/or Distributors of the BioAxxis®
BD1 will not be responsible for any damages caused
by incorrect installation or mishandling of the lock.
Any such damages will void manufacturer's
warranty.
BioAxxis® BD1
http://www.BioAxxis.com
1

Advertisement

Table of Contents
loading

Summary of Contents for BioAxxis BD-1

  • Page 1: Preface

    PREFACE Thank you for purchasing the BioAxxis® BD-1 fingerprint deadbolt. Please read the documentation carefully before installation & use. The manual details all installation procedures and operation steps. Manufacturer and/or Distributors of the BioAxxis® BD1 will not be responsible for any damages caused by incorrect installation or mishandling of the lock.

  • Page 2: Table Of Contents

    Section II - Enrolling Fingerprint Users 3 thru 30:... 33 Section III – Deleting Individual Fingerprint Users:..36 Section IV – Deleting ALL Fingerprint Users: ....39 Section V – Unlocking the BioAxxis® BD1 from outside: ..................41 Section VI – Locking the BioAxxis® BD1 from Outside: ..................

  • Page 3: Parts

    1. Parts Please familiarize yourself with all the parts in the packaging box of the BioAxxis® BD1. If any part is missing or damaged, contact our service center or your local dealer. Outdoor Unit Strike Lining Box Indoor Unit...

  • Page 4: Required Tools

    ④ One 2 1/8” Diameter Drill Bit ⑤ A Carpenter Chisel ⑥ A Hammer ⑦ A pair of scissors ⑧ ⑧ ⑧ ⑧ Vise-Grip ⑩ ⑩ ⑩ ⑩ ⑨ Philips & flat head screw drivers Metal Cutters or Hacksaw 11) Marker BioAxxis® BD1...

  • Page 5: Pre-Installation

    For doors with existing deadbolt lock with 2 1/8” diameter hole: 1) Remove existing cylindrical deadbolt . 2) Please be sure to use the installation template when installing the BioAxxis® BD1 on a door with an existing deadbolt. BioAxxis® BD1...
  • Page 6 2 1/8” hole, making sure that it is aligned properly for the door’s existing 2 3/8” or 2 ¾” backset. 5) Mark the two, 3/8” holes that you cut out of the installation template on the door (with a magic marker). BioAxxis® BD1...
  • Page 7 6) Bore the two, 3/8” holes into the door (using a 3/8” drill bit), making sure that the holes fully penetrate through the door. 7) Go to Section 4.3 in the User Manual BioAxxis® BD1...
  • Page 8 C. Mark the center points of the two small holes on the door face for the two upper fixing posts mounted on the top plate of the outdoor unit, as indicated on the installation template. BioAxxis® BD1...

  • Page 9: Deadbolt Latch Selection

    There are two deadbolt latches in each box, one with a 2 3/8” (60mm) backset and the other with a 2 ¾” (70mm) backset. Make sure which length you will need and select the right one before installation. BioAxxis® BD1...

  • Page 10: Installation

    B. Then chisel 1/8” deep rectangular shape, per your marking (or until the faceplate is flush with the door edge). C. Insert the deadbolt latch; make sure the deadbolt UP sign is facing upwards. Then fasten the screws. BioAxxis® BD1...

  • Page 11: Installing Strike And Strike Lining Box (On The Door Jamb)

    1” deep. C. Chisel the door jamb at 1/16” deep for the strike plate which must fit flush with the door jamb. D. Insert the strike lining box and then fasten screws to the plate. BioAxxis® BD1...

  • Page 12: Sizing Tail Piece (To The Right Length)

    4.3 Sizing Tail Piece (to the right length) The BioAxxis® BD1 is designed to fit door thicknesses of 1 3/8” to 2”. Four pre-sized tailpieces are included with the BioAxxis® BD1 for 1 3/8”, 1 ½”, 1 ¾” and 2” thick doors.
  • Page 13 Notes: The motor could be dislodged if the tailpiece is not cut properly and is too long, due to excessive pressure. Warranty will be voided if this occurs. BioAxxis® BD1...

  • Page 14: Installation Of The Outdoor Unit

    4.4 Installation of the Outdoor Unit 1) Attach e rubber gasket to the back of the outdoor unit. 2) Make sure the tail piece is vertical. BioAxxis® BD1...
  • Page 15 4) Insert tail piece through the cross slot of the latch. 5) Insert the connector and wire through the cylinder hole below the deadbolt latch. 6) Insert the two upper fixing posts through the small upper holes on the door (the newly drilled holes). BioAxxis® BD1...

  • Page 16: Installation Of The Indoor Unit

    “R” position. 2) Left handed doors are defined as hinge on the left when you are entering the home from outside. The opposite is true for right handed doors. Right Handed/Left Handed BioAxxis® BD1...
  • Page 17 3) Plug wire set into circuit board, making sure all prongs are firmly seated. 4) Press sheathing of wire casing into the wire holder clamp. BioAxxis® BD1...
  • Page 18 5) Turn the manual turn knob to the vertical position, facing downward. BioAxxis® BD1...
  • Page 19 7) Gently finish joining the outdoor and indoor units together, ensuring all fixing posts are aligned properly. 8) Fasten the two shorter screws through the upper fixing post holes on the upper section of the inside unit. BioAxxis® BD1...
  • Page 20 9) Fasten the two long screws through the bottom fixing post holes on the inside unit. 10) Move the manual turn knob back and forth to ensure that deadbolt opens and closes mechanically. BioAxxis® BD1...
  • Page 21 11) Insert 4 high-quality AA batteries BioAxxis® BD1...
  • Page 22 ③ Try to lock and unlock from inside by pressing the Open/Close button to ensure it works well electronically. IMPORTANT SECURITY NOTE: WITHOUT ANY FINGERPRINTS ENROLLED, THE BD1 WILL LOCK AND UNLOCK BY FULLY OPENING AND FULLY CLOSING THE SLIDING COVER. BioAxxis® BD1...

  • Page 23: Trouble Shooting

    (facing down). 2. Tail piece was trimmed too short 2. Contact the BioAxxis® and does not BD1 dealer that you penetrate the slot of purchased to lock from the indoor unit;...
  • Page 24 (fingerprint scanner does not blink) Wires not 2. Check the connections connected properly and make sure wires are fully plugged in. Six beeps are heard Low Voltage Change the batteries when any function is performed. BioAxxis® BD1...

  • Page 25: Operation Manual

    Operation Manual Operation Manual Helpful Hints (Please read before attempting to program the BioAxxis® BD1): Please be sure to physically leave your door open until you have successfully enrolled the first user (ADMINISTRATOR) into the BioAxxis® BD1 and have successfully verified the new user’s fingerprint to unlock the door.
  • Page 26 Common definitions of terms used when using the BioAxxis® BD1: Fingerprint Enrollment: Process of adding fingerprints to the BioAxxis® BD1. Enrolled Fingerprints: Fingerprints that have been successfully added into the BioAxxis® BD1. Verifying Fingerprints: Process of authentication by scanning enrolled fingerprints to:...
  • Page 27 This is true for both fingerprint enrollment AND verification. When trying to enroll or verify fingerprints in direct sunlight, be sure to shade the sensor with your shadow, so sunlight will not reflect off of the mirror in the sensor. BioAxxis® BD1...

  • Page 28: Section I - Enrolling Administrators (First 2 Fingerprint Users)

    Sliding cover must be closed before any programming sequence can begin. As noted in the Helpful Hints section, the first two users that enroll their fingerprints into the BioAxxis® BD1 will automatically be programmed as ADMINISTRATORS (Users 1 and 2). ADMINISTRATORS can apply all programming functions as well as verify their fingerprints to unlock the door.
  • Page 29 • Press the “ ADD ” button located on the indoor unit • Single beep will be heard • Fully open the sliding cover located on the outdoor unit immediately • Sensor will flicker for less than one second BioAxxis® BD1...
  • Page 30 Single, long beep indicating that the operation was successful o Four beeps indicating that your fingerprint was not successfully enrolled. If you hear four beeps, please start the enrollment process over from the beginning • Close the sliding cover BioAxxis® BD1...
  • Page 31 • Press the “ ADD ” button located on the indoor unit • Single beep will be heard • Fully open the sliding cover located on the outdoor unit immediately • Sensor will flicker for less than one second BioAxxis® BD1...
  • Page 32 Single, long beep indicating that the operation was successful o Four beeps indicating that your fingerprint was not successfully enrolled. If you hear four beeps, please start the enrollment process over from the beginning BioAxxis® BD1...

  • Page 33: Section Ii - Enrolling Fingerprint Users 3 Thru 30

    (Users 3 thru 30) are automatically programmed at the USER level. USER level fingerprints can only be used to unlock the door, not to program the lock. Please use the following steps to enroll additional fingerprint users (Users 3 thru 30): BioAxxis® BD1...
  • Page 34 • Press the “ ADD ” button located on the indoor unit • Single beep will be heard • Fully open the sliding cover located on the outdoor unit immediately • Sensor will flicker for less than one second BioAxxis® BD1...
  • Page 35 Single, long beep indicating that the operation was successful o Four beeps indicating that your fingerprint was not successfully enrolled. If you hear four beeps, please start the enrollment process over BioAxxis® BD1 from the beginning...

  • Page 36: Section Iii - Deleting Individual Fingerprint Users

    Sliding cover must be closed before any programming sequence can begin. The Individual Fingerprint User Deletion programming function deletes fingerprint users from the most recent fingerprint user enrolled to the earliest fingerprint user enrolled. Please use the following steps to delete individual fingerprint users: BioAxxis® BD1...
  • Page 37 “ DEL ” button located on the indoor unit • Short, Double Beep will be heard • Fully open the sliding cover located on the outdoor unit immediately • Sensor will flicker for less than one second BioAxxis® BD1...
  • Page 38 Administrator’s fingerprint was not successful. Begin again from the first step of Section III • Close the sliding cover • Repeat steps from the beginning of Section III to delete the next most recently enrolled fingerprint user. BioAxxis® BD1...

  • Page 39: Section Iv - Deleting All Fingerprint Users

    Deleting ALL enrolled fingerprint users will reset the lock and all users (including Administrators fingerprints) will be deleted. With no fingerprints enrolled in the BioAxxis® BD1, the deadbolt will engage/disengage when the sliding cover is fully opened and immediately closed.
  • Page 40 Begin again from the first step of Section IV • Close the sliding cover IMPORTANT SECURITY NOTE: WITHOUT ANY FINGERPRINTS ENROLLED, THE BD1 WILL LOCK AND UNLOCK BY FULLY OPENING AND FULLY CLOSING THE SLIDING COVER. BioAxxis® BD1...

  • Page 41: Section V - Unlocking The Bioaxxis® Bd1 From Outside

    Section V – Unlocking the BioAxxis® BD1 from outside: In case of emergency, override keys can be used to disengage the deadbolt. Please use the following steps to unlock the BioAxxis® BD1 from outside, with your enrolled fingerprint: • Fully lift the sliding cover located on the outdoor unit.
  • Page 42 If all the two additional verification attempts still fail, please start the unlocking process over again, from the beginning of this section. • Close the sliding cover BioAxxis® BD1...

  • Page 43: Section Vi - Locking The Bioaxxis® Bd1 From Outside

    Section VI – Locking the BioAxxis® BD1 from Outside: In case of emergency, override keys can be used to engage the deadbolt. Please use the following steps to lock the BioAxxis® BD1 from outside (when leaving): • Make sure your door is closed •...

  • Page 44: Section Vii - Locking And Unlocking The Bioaxxis® Bd1

    Section VII – Locking and Unlocking the BioAxxis® BD1 from Inside: In case of emergency, manual turn knob can be used to disengage the deadbolt. Please use the following steps to lock and unlock the BioAxxis® BD1 from inside: • Press the ” OPEN/CLOSE ” button (located between the ADD and DEL buttons) •...

  • Page 45: User Enrollment Table

    USER ENROLLMENT TABLE: Number Hand (R or Finger Used Name BioAxxis® BD1...
  • Page 46 BioAxxis® BD1...

Table of Contents