Sony TRINITRON KV-20FV10 Service Manual page 9

TV and Cable Box
1
Connect the coaxial cable from the wall to the IN jack on your cable
box.
2
Connect a coaxial cable (not supplied) from the OUT jack on your
cable box to the VHF/UHF IN jack on the TV.
To view channels from your cable box, tune your TV to channel 3 or 4 (as set
on the rear panel of your cable box).
If you will be controlling all channel selection through your cable box, you
should consider using the CHANNEL FIX feature on page 20.
5
TV, VCR, and Cable box
3
VCR
2
Cable box
4 (Optional connection)
1
Cable
1
Connect the coaxial cable from the wall to the IN jack on your cable
box.
2
Connect a coaxial cable (not supplied) from the OUT jack on your
cable box to the IN jack on your VCR.
3
Connect a coaxial cable (not supplied) from the OUT jack on your
VCR to the VHF/UHF IN jack on the TV.
If you will be controlling all channel selection through your cable box, you
should consider using the CHANNEL FIX feature on page 20.
(Optional connection)
4
If your VCR is equipped with video inputs, for better picture quality
you should connect A/V cables from AUDIO and VIDEO OUT on
your VCR to AUDIO/VIDEO IN on your TV. You can use the
button to switch between the TV and VCR inputs.
For optimum picture quality, use S VIDEO instead of the yellow A/V cable.
S VIDEO does not provide sound, the audio cables must still be connected.
6
TV