Contents Package Contents ..........2 Managing Stations: Sorting Channel List ..... 15 Features ..............2 On-Screen Information ......... 16 Introduction ............. 2 Media Playback Using Media Browser ....16 Preparation ............. 2 Viewing Videos via USB ........16 Viewing Photos via USB ........17 Safety Precautions ..........
Safety Precautions Lightning In case of storm and lightning or when Read the following recommended safety going on holiday, disconnect the power precautions carefully for your safety. cord from the wall outlet. Power Source Replacement Parts The TV set should be operated only from a 220-240V When replacement parts are required, make sure that AC, 50 Hz outlet.
Installation The Standby On/Off button does not completely switch off this device, it will still consume power. In order To prevent injury, this device must be securely to fully switch off this device, the power should be attached to the wall in accordance with the installation switched off at the mains socket.
Environmental Information • This television is designed to consume less energy to save environment. You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy efficiency feauture of this TV. To reduce energy consumption, you should take the following steps: •...
Remote Control Buttons Standby Yellow button Blue button Return / Exit menu / Index Page (in TXT mode) Navigation buttons OK / Channel list Picture mode selection EPG (Programme Guide) Programme Up / Down Numeric buttons Previous programme Subtitle on/off Sleep timer Teletext / Mix No function...
LED TV and Operating Buttons FRONT and REAR VIEW Control buttons VIEW Control Buttons 1. Standby Off/On button 2. TV/AV button 3. Programme Up/Down buttons- Volume Up/Down buttons Note:You can use +/- buttons to change volume. If you want to change channels, press P/V/ AV button once and then use +/- buttons.
PC Input is for connecting a personal computer to the TV set. Connect the PC cable between the PC INPUT on the TV and the PC output on your PC. Note: You can use YPbPr to VGA cable (not supplied) to enable YPbPr signal via PC input. WARNING: You cannot use PC and YPbPr at the same time.
Switching On/Off First Time Installation To Switch the TV On IMPORTANT: Ensure that the aerial is connected before switching on the TV for the first time • Connect the power cord to the 220-240V AC 50 Hz. installation. Then the standby LED lights up. (The led will blink during the standby On/Off) •...
To select the “Yes” or “No” option, highlight the item by Connecting to a DVD player using “ ” or “ ” buttons and press OK button. via HDMI Afterwards, the following OSD will be displayed on the screen and the television will search for digital Please refer to your DVD player’s instruction book terrestrial TV broadcasts for additional information.
• You may also connect through the SCART input. Using Side AV Connectors You can connect a range of optional equipment to your LED TV using side connectors of the TV. • For connecting a camcorder or camera , you should use AV socket (side).
Volume Setting Input Selection • Press “ V+” button to increase the volume. Press “V-” Once you have connected external systems to button to decrease the volume. A volume level scale your TV, you can switch to different input sources. (slider) will be displayed on the screen.
Numeric buttons (Jump): Jumps to the preferred EPG Screen Three channel directly via numeric buttons. OK (Options): Displays programme options including “Select Channel” option. Text (Search): Displays “Guide Search” menu. You can search programmes using the Guide Search screen. There are searching options located within the Guide Search Screen.
• Whenever you select an automatic search type and Enter the channel number or frequency using the press OK button, a confirmation screen will appear numeric buttons. You can then press OK button on the screen. To start installation process, select to search.
Moving a Channel Managing Stations: Favourites • First select the desired channel. Select Move option You can create a list of favourite programmes. in the channel list and press OK button. • Press MENU button to view main menu. Select •...
Viewing Videos via USB On-Screen Information You can press INFO button to display on-screen information. Details of the station and current programme will be displayed on the information banner. The information banner gives information on the channel selected and the programmes on it. The name of the channel is displayed, along with its When you select Videos from the main options, the channel list number.
Viewing Photos via USB Playing Music via USB When you select Photos from the main options, When you select Music from the main options, available image files will be filtered and listed on this available audio files will be filtered and listed on this screen.
Subtitle Slide Show Interval: Sets slide show interval time. Show Subtitle: Sets subtitle enabling preference. This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen. Subtitle Language: Sets supported subtitle language. Subtitle Position: Sets subtitle position as up or down.
Cinema Colour: Sets the colour value, adjusting the colours. This zooms up the wide picture (16:9 aspect ratio) to Colour Shift: Adjust the desired colour tone. the full screen. Colour Temp: Sets the desired colour tone. Setting Cool option gives white colours a slight blue stress.
V Position: This item shifts the image vertically towards the top or bottom of the screen. Dot Clock: Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts. Phase: Depending on the resolution and scan frequency that you input to the TV set, you may see a hazy or noisy picture on the screen.
Operating Settings Menu Items Configuring Language • Press “ ” or “ ” button to highlight a menu item. Preferences • Press OK button to select an item. You can operate the TV’s language settings using • Press MENU button to exit. this menu.
Language Settings Parental Settings Menu Operation • Select an item by using “ ” or “ ” button. • Use “ ” or “ ” button to set an item. • Press the OK button to view more options. Menu Lock: Menu lock setting enables or disables In the configuration menu, highlight the Language the menu access.
Setting Programme Timers Configuring Date/Time You can set programme timers for a particular Settings programme using this feature. Select Date/Time in the Settings menu to configure Press “ ” button to set timers on an event. Programme Date/Time settings. Press OK button. timer function buttons will be displayed on the screen.
• Select Sources in the Settings menu and press OK Software Upgrade: To ensure that your TV always button. has the most update information, you can use this setting. • Press“ ” or “ ” buttons to select a source. •...
Coloured Buttons (RED/GREEN/YELLOW/ Other Features BLUE) Displaying TV Information: Programme Number, Your TV supports both FASTEXT and TOP text Programme Name, Sound Indicator, time, teletext, systems. When these systems are available, the channel type and resolution information is displayed pages are divided into groups or topics. When on the screen when a new programme is entered or FASTEXT system is available, sections in a teletext “INFO”...
Tips Screen Care: Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the coating layer of the TV screen. For your safety, unplug the mains plug when cleaning the set. When moving the TV, hold it properly from the bottom.
Appendix A: PC Input Typical Appendix B: AV and HDMI Signal Display Modes Compatibility (Input Signal Types) The display has a maximum resolution of 1360x768. The following table is an illustration of some of the Source Supported Signals Available typical video display modes. Your TV may not support PAL 50/60 different resolutions.
Appendix C: Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cables (not supplied), you can refer to the following resolution information. 24Hz 25Hz 30Hz 50Hz 60Hz 480i þ 480p þ 576i þ 576p þ 720p þ...
Appendix E: Software Upgrade • Your TV is capable of finding and updating new software upgrades over broadcast channels. • For broadcast channels search, the TV looks at the available channels stored in your settings. So before software upgrade search, it is advised to auto search and update all available channels. 1) Software upgrade search via user interface •...
Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply. MAINS (AC) OPERATION The wires in the mains lead are coloured in accordance with the following code : GREEN FUSE &...
Need help?
Do you have a question about the LED19914HD and is the answer not in the manual?
Questions and answers