Table of Contents
Advertisement
5.4.6.4
5.4.6.5
Siemens AG
ICM CP
The following link information is indicated:
•
State (indication of the MAC address of the access point PC-Card if in
infrastructure mode, in ad hoc mode no MAC address is indicated)
•
Current Channel
•
Current TxRate [Mbps]
•
Link quality [%]
•
Signal strength [%]
PC Direct Connection
Manual activation of a PC direct connection as defined with the program Remote
Network (see 5.4.6.1) and activated as default PC direct connection in the
Communication setting program (see 5.4.13.2).
Terminal
Terminal emulation program supporting TTY and VT-100 terminal emulation. As for
the program Remote Network (see 5.4.6.1) various connection set-up can be created,
edited or deleted. The communications can be defined for all available modem
interfaces:
•
Hayes-compatible on COM1 (RS-232)
•
COM2 (not used)
•
COM3 (not used)
•
Generic IrDA modem
•
IR on SP2
A connection set-up appears as an icon or as an entry in a list. It contains all pre-
configured parameters (interface, calling number, server name etc.). The required
connection is set up by a double click on the appropriate entry.
The following parameters can be configured:
Data transfer
Dial-up parameters
Dial-up pattern
Emulation
Parameter
Session name
Modem connection
Telephone number
Country code
Force long distance
Force local
Dial-up from "office" or "home"
Actual country code
Actual local code
Dial-up with tone of pulses
Knocking block by dialing: ...
Local calls
Long distance calls
Calls abroad
Emulation type: DEC VT-100 or TTY
(generic)
Code: Automatic search, US-ASCII,
JIS, SJIS or Unicode
Local echo
Technical Description
SIMpad SL4
Version V2.0
Default value
(none)
(none)
(none)
(none)
(not selected)
(not selected)
office
(none)
(none)
tone
(not selected),
(none)
number
Local code,
number
Country code, local
code, number
DEC VT-100
(not selected)
20.08.01, David Brunner
44/74
Advertisement
Table of Contents
