Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for AneX AG-2095
- Page 1 Instructions for use Best. No... item no... Ref. No. AG-2095...
- Page 2 Safety Instructions Keep the packing film away from children.(Danger of suffocation) Keep the appliance away from Children Only use the appliance for the purpose intended! NEVER leave the device unattended when in operation. This appliance operates using dangerous voltage levels. Never switch it on if the power supply cable is damaged, or if any other damage is visible on the appliance.
- Page 3 applies to wear & tear on the parts, e.g. the filter. Do not push objects into the orifices. The appliance should never be used if any orifice is blocked. Remove all dust, fluff, hair and other objects blocking the air intake or exhaust air vent. ...
- Page 4 Your cyclone vacuum cleaner and its technical data: Attachments: 1. Floor nozzle 2.Flexible Hose 3.Telescopic Tube 4.Dust Tank and HEPA filter 、 5. 3 in 1 dusting accessories Equipments: Washable long-life filter Mesh filter Automatic cable rewind ...
- Page 5 Technical data: Main connection: 220V~240V，50Hz We reserve the rights to make changes to the scope of deliverables, equipment and the technical data! Parts: Take care when unpacking the device and ensure that you keep all packing materials for the duration of the guarantee period.
- Page 6 Explanation of accessories: You will receive four different nozzles with your cyclone vacuum cleaner. These allow the device to be utilized for a variety of applications. Floor nozzle: The floor nozzle is the fitting most commonly used. It is perfect for us on large, even areas.
- Page 7 Assembling your cyclone vacuum cleaner: Attention: Before attaching or detaching any accessories always ensure that you unplug the power supply from the wall socket! 1. Attaching or detaching the hose: To attach: Push the vacuum hose into the air intake opening until it snaps into place. To detach: Push the button on the vacuum hose to release the hose.
- Page 8 identified by the red marking. Turn on the cyclone vacuum cleaner by gently tipping the foot to press down on the ON/OFF switch. Note: On rare occasions it is possible that a “whistling” sound may be heard when the device is switched on. This will cease after a short period and does not indicate the presence of fault.
- Page 9 the plug housing) Take the plug in your hand in order to avoid the cable flicking up during the winding process. Press down on the cable rewind button with the foot until the cable has rewound completely onto the cable drum, which is inside of the cyclone vacuum cleaner.
- Page 10 device back. This action will open the bottom of the dust receiver tank, which will release its contents into the bin. Note if the dust receiver tank is very full, it is recommended that a bag be pulled over the tank so that the tank can be emptied into the bag first.
- Page 11 The HEPA filter is wrapped with a mesh filter, uncover the mesh filter first and clean it. Clean the HEPA filter thoroughly. Never clean the HEPA filter using soap or any other cleaning fluid. This would destroy the filter! ...
- Page 12 Fault finding: When using a highly technical device do not assume that every irregularity is defect. Always consult the table first, in order to assess whether you are able to solve the problem yourself. If this does not prove possible, please contact our Customer Service by telephone. Problem Possible causes Solution / Tip...
- Page 13 and user instruction manual at any time within the framework of on-going developments.
Need help?
Do you have a question about the AG-2095 and is the answer not in the manual?
Questions and answers