Related Manuals for EXITEQ MC-HT571
Summary of Contents for EXITEQ MC-HT571
-
Page 1: Instruction Manual
Instruction Manual Ceramic Hob Model : MC-HT5 1 Thank you for purchasing the ceramic hob, please read this intructions manual carefully before using and keep it cautiously for your future reference. -
Page 2: Product Introduction
Dear customer, Thank you for purchasing the our ceramic hob. Our product can serve you many years to your satisfaction. Please read this instructions manual carefully before using and installation. Keep it in a good place after reading for future reference. Thank you again for your purchase of our ceramic hob, and wish you to enjoy the pleasure brought about by it. -
Page 3: Installation
Safety Residual heat indicators After using the hob, waste heat remains in the heating area. The power nixie tube shows the code “H”, warning to be away from the heating area. Auto shut down protection During the hob working, it is shut off automatically when the default timing reach by the program if without operating. - Page 4 Under any circumstances, make sure the ceramic hob is well ventilated and the air inlet and outlet are not blocked. Ensure the ceramic hob is in good work state. As shown in Figure (2) Air exit mini 5 cm mini 5 mm mini 2 cm Air intake Figure (2)
- Page 5 Cautions The ceramic hob must be installed by qualified personnel or technicians. We have professionals at your service. Please never conduct the operation by yourself. The ceramic hob shall not be mounted to cooling equipment, dishwashers and rotary dryers. The ceramic hob shall be installed such that better heat radiation can be ensured to enhance its reliability.
-
Page 6: Instructions For Use
The ceramic hob appearance Glass plate Power cord Control panel ON/OFF Schematic diagram of the control panel Lock Timer regulating key On/Off Treble zone Power regulating key Instructions for Use Put the pot in the center of the heating zone. Preparation before using After power on, the buzzer keep once, all the indicators light up for 1 second then go out, indicating the ceramic hob enters into standby mode. -
Page 7: Operation Instructions
Operation Instructions: Switch on the ceramic hob Press the “On/Off” key, the hob go to stanby mode,all the indicator shows “-”.If the ceramic plate is hot,the indicator shows “-” and “H” alternately. Press the “-” or “+“ to decrease or increase the power level. If the ON/OFF power level returns to 0, the zone switch off. - Page 8 Timing cancellation: If press the "+" and "-" simultaneously, the timing can be cancelled automatically, with the timing indicator showing “--”. Lock function : To ensure the safety of children, the hob is provided with the function of lock function. Activating the lock function : When the lock is deactivated, touch the “Lock”...
- Page 9 Metallic objects such as For sealed foods such as If the supply cord is damaged knives, forks,spoons and lids canned goods, please do not , it must be replaced by the should not be placed on the heat them before opening their manufacturer, its service agent hotplate since they can get covers so as to avoid any...
- Page 10 1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
-
Page 11: Maintenance Service Warranty
Maintenance Service Warranty For any failure of the product, please contact the special maintenance department or the customer service center. 1. There is a year’s guarantee with this brand ceramic cooker hob. 2. The period of warranty shall start from the date on which the invoice is issued.
Need help?
Do you have a question about the MC-HT571 and is the answer not in the manual?
Questions and answers