Insert the 4pcs M6 bolts (With
2 washers each) into the hole
and tighten the bolts and nuts.
.
(See Fig 10)
Use the E-clip to fix
the footrest angle adjustment tube.(See Fig 11)
Bolt and Nut
6.Installing controller and connect cables
Assemble the controller (#4) on right armrest (#6) bracket with 2 screws.(See Fig 12)
There is 1 plug (9 pins) in the other end on the controller. Please plug in the main frame (#1) plugs
and make sure tightly connection in each plugs.(See Fig 13)
Screw
Driver
Note: Besides you have to plug in the main frame for batteries cables (connect for color by color) if
you will reconnect your batteries cable. (See Fig 14)
(Fig 10)
(Fig 12)
(Fig 11) Footrest angle adjustment tube
Module
(Fig 13)
9
E Clip
Lighting plug