Advertisement
Available languages
Available languages
User Manual
Introduction
This USB 3.0 Desk Hub and Card Reader provides three USB 3.0 SuperSpeed ports, a card reader and
audio sockets for earphone and microphone. It simply fits into a desk´s pre-cut 6cm grommet for quick
and easy access.
Package Contents
•
USB 3.0 Desk Hub and Card Reader
•
This User Manual
Features
•
Simply fits into a desk´s pre-cut 6cm grommet for quick and easy access
•
3 Port USB 3.0 hub with two slots for the following memory cards: SDXC/SDHC/SD/Micro
SDHC/Micro SD/MMC/RS-MMC
•
USB 3.0 SuperSpeed data transfer rate up to 5Gbps, backwards compatible with USB 2.0/1.1
•
Features two 3.5mm audio sockets for earphones and microphones
•
Integrated 1.2m USB 3.0 & 3.5mm audio connection cables
•
USB bus powered, devices with high power demand may need an extra power supply (not
included)
•
Compatible with all USB 3.0 equipped operating systems
Installation & Operation
Insert the USB 3.0 Desk Hub and Card Reader into the 6cm grommet of your desk. Lead the cables
downwards out of the desk. Connect the USB cable to a free USB port and the 3.5mm Audio connection
cables to the corresponding sockets for earphone and microphone on your computer. Your computer will
recognize the new hardware and install any required drivers automatically. To allow the passage of
cables with bulky connectors, the inner element of the USB 3.0 Desk Hub and Card Reader can be
taken out of the outer ring. So you can first insert the outer ring into the 6cm grommet of your desk, then
you lead the cables through the opening and finally insert the inner element again. For USB devices with
high power demands, such as a hard drive, it may be necessary to connect a 5V power supply with a
3.5mm/1.35mm (Outer/Inner) DC Barrel (not included).
English
Advertisement
