Advertisement
The Ride configuration (only
3
available in the 3-in-1 Scooot)
Before you start to use Scooot, adjust and
secure all components as recommended
and check elastic straps for any sign of
damage, wear or tear. If there is damage,
do not use the product and phone
customer services for advice. Position
Scooot somewhere it will not move while
your child transfers to it. Hold it steady or
place it against a wall for extra support.
The padded cover is optional in the 'ride'
configuration. Secure the backrest by
following the assembly instructions in
section 9.2 step 3.
Adjust the footrest to suit your child's leg-
length so that their feet do not extend
beyond the end of the footrest. See
section 9.2 steps 4-6.
Open the belt and ensure it is clear of the
seating area. Place your child so that their
back is up against the backrest.
Attach the belt around the child's waist.
Clip together and pull the two D-rings
away from the centre buckle to tighten
the belt, ensuring the webbing does not
become twisted.
Ensure your child is comfortable
and stable in the 'ride'
configuration before use.
When using 'ride', children can propel
themselves using the wheels. Pushing
both wheels forwards will result in
forward movement, and pushing
backwards will result in backward
movement. Pushing forward on the
right wheel will result in a left turn, and
pushing forward on the left wheel will
result in a right turn. Pushing backwards
on the right wheel will result in a right
turn, and pushing backwards on the left
wheel will result in a left turn.
The wheels are smooth for indoor use.
Remember there are no brakes on
Scooot, so use the 'ride' configuration on
a flat surface. Supervise your child until
they are competent at the movements
themselves.
Advertisement
