Advertisement
We strongly recommend the use of high-grade cables and connectors for
the transmission of audio signals. Inferior quality materials cannot supply
acceptable audio quality or corrosion protection.
28. The GND connection allows grounding of a turntable
Side Panel
E
29.
N
connect your headphones (output signal is main mix). For
G
best results, use headphones with an impedance rating of
L
at least 32 Ohms
I
S
USB/MP3/Bluetooth-Player
H
Mode button
This button let you select the working mode of the MP3/USB/BT player (channel 4), USB
play mode, Bluetooth mode or record mode. The two (green/red) mode LEDS will indicate
the actual device status. Press the MODE button several times to step to your desired
function.
MODE
USB play mode
Bluetooth mode
Record mode
USB Play mode:
Press MODE button until Status LEDs display LED1=ON/LED2=OFF. The USB
storage device (stick) is placed into USB socket. The Player is ready to work.
Each press of the PLAY BUTTON causes the operation to change from play to
pause or from pause to play
PREV/NEXT button: Use this buttons to jump to previous/next track. The track will
fast backward/ forward play if press and holding the button for more than 3 seconds.
Bluetooth (BT) mode:
Press MODE button until Status LEDs display LED1=FLASH/LED2=OFF. The BT-
Player is searching for a connection. If the device which already had a connection in
the past is still active, the connection will be made and LEDs change to ON/ON. The
BT-Player is now ready to work. For first connection use your BT-Player (e.g.
smartphone) and search for „MIXER DX50BT".
HEADPHONES 6.35mm stereo jack allows you to
LED1
LED2
ON
OFF
Connection search
FLASH
OFF
Connecting
ON
ON
Ready
ON
FLASH
Recording
FLASH
FLASH
Play
ON
OFF
Bedienelemente
1. MIC Balance, Balanceregler MIC1 und MIC2 Eingangssignal
2. MIC LEVEL, Lautstärkeregler Mikrofonsignal im Gesamtmix
3. CHANNEL 1, Lautstärkeregler Kanal (1) im Gesamtmix
4. PHONO1/LINE1 Wahlschalter Plattenspieler "PHONO" oder "LINE" Signal (CD, Player,
PC, etc.)
Achten Sie auf richtige Schalterstellung gemäß dem angeschlossenen
Gerät. „PHONO" Signale bewegen sich bis ca. 15 mV, Line Signale bis ca.
2V. Eine falsche Schalterstellung führt zu verzerrten Ausgangssignalen bis hin zu
Beschädigung des Geräts.
Sollte kein Plattenspieler angeschlossen sein, belassen Sie die
Schalterstellung auf "LINE" um Rauschen oder Störsignale zu vermeiden
5. CHANNEL 2, Lautstärkeregler Kanal (2) im Gesamtmix
6. PHONO2/LINE2 Wahlschalter siehe oben
7. CHANNEL 3, Lautstärkeregler Kanal (3) im Gesamtmix
8. Channel 3 Eingangs-Wahlschalter: sie können zwischen zwei "Line"-Geräten
LINE3/LINE4 (CD, MP3, Tapedeck, etc.) auswählen
9. CHANNEL USB, Lautstärkeregler Kanal (4) USP/MP3/BT-Player im Gesamtmix
10. MONO/Stereo Wahlschalter Ausgangssignal in mono/stereo
11. POWER ON, EIN/AUS-Schalter des DX-50BT DJ-Mixer
Bedienung und Funktionen
D
E
U
T
S
C
H
Advertisement
