Advertisement
Operation Voltage: 3.3V
Product weight: 210g
Product Size: 260*83*13.5mm
Installation
Open the gift box and pick up USB receiver from back cover of the keyboard.
Insert the USB Receiver into an available USB port.
Turn on the keyboard. The keyboard will be found automatically. No further actions
are required – you are now ready to use your keyboard!
NOTE：USB cable can be used for battery charging
Connecting the receiver
Slide the receiver out from the side of keyboard, and insert to
the devices with a standard USB interface. Once connected,
slide the power switch to the "ON" position located on the left
side of the unit to establish the connection.
Touchpad
This touchpad supports multi-finger functions.
1. When a single finger click, on behalf of the left mouse
function keys
2. When two-finger click, on behalf of the right mouse
function keys
3. When a single finger sliding pointer can be controlled
4. When a single finger double-click, you can achieve open the file pointer is
positioned.
Auto sleep and wake up feature
The keyboard also have an auto sleep and wake up feature.Within three minutes, if having
no key pressed, the keyboard will automatically go into sleep mode. In sleep mode, all
lights extinguished state. Users can click on any key to activate the device
Switching off the keyboard after use
After using the keyboard, push the switch to the "OFF" position. This turns off the
keyboard. The USB receiver does not need to be pulled out from the PC. You can use it
directly next time.
Charging the battery
The device uses built-in lithium-ion battery. Please use only approved data cables and
chargers.
NOTE: Fully charge the unit before initial operation. This device can be used when
charging, but charging time will be extended.
When the battery is low, the low-voltage light will blink towarn the user. The unit will be
automatically turned off ifthe battery has been depleted.
Importer: nTec
ul. Chorzowska 44B
44-100 Gliwice
More information available
on the website:
www.qoltec.com
Advertisement
