Linksys WAP11 User Manual page 9

Figure 5-1
3. You can configure the Access Point through any PC connected to your
Ethernet network. Make sure the Access Point is connected to one of your
network switches or hubs. Click the Next button to continue or Exit to exit
the Setup Wizard.
Figure 5-2
8
Instant Wireless ® Series Wireless Network Access Point
4. The next screen to appear, shown in Figure 5-3, will display a list of access
points on your network, along with the status information for each access
point. If there is only one access point on your network, it will be the only
one displayed. If there are more than one displayed, select the Access Point
by clicking on it, and click the Yes button to continue or No to exit the Setup
Wizard.
Figure 5-3
5. On the Enter Network Password screen, enter the default password, admin,
in the Password field. Then click the OK button. For added security,
remember to change this password later through the Web-based Utility's
Password screen.
Figure 5-4
9