Related Manuals for Spitfire MA6720 AU series
Summary of Contents for Spitfire MA6720 AU series
-
Page 1: Ceiling Fan
The Spitfire ™ Ceiling Fan Net Weight 00.0 kg (00.0 lbs) Model No. MA6720**AU OWNER’S MANUAL READ AND SAVE THESE INSTRUCTIONS... -
Page 2: Table Of Contents
Important Safety Instructions WARNING: To avoid fire, shock and serious personal injury, follow these instructions. 1. Read your owner’s manual and safety information before installing your new fan. Review the accompanying assembly diagrams. 2. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally. -
Page 3: Tools Needed For Assembly
This manual is designed to make it as easy as possible to assemble, install, operate, and maintain this ceiling fan Tools Needed for Assembly Materials Wiring and connectors must be of type required by • One Phillips head screwdriver • One small blade local regulations. -
Page 4: U P N C A I K G N N I R T S C U Energy Effi Cient Use Of Ceiling Fans
Ceiling fan performance and energy savings rely Using the Ceiling Fan Year Round heavily on the proper installation and use of the ceiling Summer Season: Use the ceiling fan in the counter- fan. Here are a few tips to ensure efficient product clockwise direction. -
Page 5: How To Hang This Ceiling Fan
How to Hang This Ceiling Fan WARNING To avoid possible fire or shock, be sure electricity is turned off at the main fuse box before wiring. MAIN FUSE BOX (Figure 1) Figure 1 WARNING CEILING The fan must be hung with at least 2.1m of clearance from floor to blades. -
Page 6: How To Wire This Ceiling Fan
How to Wire This Ceiling Fan Ceiling fans must be installed by a licensed electrician. WARNING To avoid possible fire or shock, be sure electricity is MAIN FUSE BOX turned off at the main fuse box before wiring. (Figure 1) Securely connect the green/yellow earth wires from the Figure 1 hanger ball and the hanger bracket and the supply... -
Page 7: Installing The Canopy Housing
Installing the Canopy Housing NOTE: This step is applicable after the neccessary wiring is completed. ▲WARNING To avoid possible fire or shock, make sure that the electrical wires are completely inside the canopy housing and not pinched between the housing and the ceiling. 1. -
Page 8: Maintenance
Mounting the Fan Blades (continued) 2. Place the magnet at the bottom center of the motor assembly. Position the trim cover onto the magnet. (Figure 2) NOTE: The trim cover not included. Motor Assembly Magnet Trim Cover (not included) Figure 2 Maintenance Periodic cleaning of your new ceiling fan is the only CAUTION... -
Page 9: Parts List
Parts List Model MAFP6720**AU Ref. # Description Part # Hanger Bracket Assembly with Screws APGAC112R-220 Downrod DR1-9** AMA6720**AU Motor Assembly Ball Downrod Assembly ADRAC1-45**AU Canopy P672001** APPAC1101** Canopy Screw Cover Assembly Motor Coupler Cover Assembly AP672002** Motor Housing Assembly AP6720**AU Blade Plate P672008NI Magnet... -
Page 10: Exploded-View Illustration
The Spitfire ™ Model MAFP6720**AU Exploded-View Figure 1 NOTE: The illustration shown is not to scale or its actual confi guration may vary. Product/parts are subject to change without notice. -
Page 11: Trouble Shooting
Trouble Shooting WARNING For your own safety, turn off power at fuse box or circuit breaker before trouble shooting your fan. Some suggested remedies require the attention of a licensed electrician. Trouble Probable Cause Suggested Remedy 1. Fuse or circuit breaker blown. 1. - Page 12 2014/09 V.01...
Need help?
Do you have a question about the MA6720 AU series and is the answer not in the manual?
Questions and answers