1. Manuals
  2. Brands
  3. Magnum Manuals
  4. Office Equipment
  5. MFM-LF
  6. Product instruction manual

Magnum MFM-LF Product Instruction Manual

Letter folding system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Product instruction manual
Magnum® MFM-LF Letter Folding System
Magnum Folders have been designed to be user friendly,
however we strongly recommend you take a few minutes
to read through this manual to ensure correct operation.
Keep this manual safe for future reference.

Advertisement

Table of Contents
loading

Summary of Contents for Magnum MFM-LF

  • Page 1 Product instruction manual Magnum® MFM-LF Letter Folding System Magnum Folders have been designed to be user friendly, however we strongly recommend you take a few minutes to read through this manual to ensure correct operation. Keep this manual safe for future reference.
  • Page 2 Contents Page 2 - Specifications Page 3 - Introduction Page 4 - Safety Instructions & environmental requirements Page 5 - Information before use Page 6 - Parts Page 7 - Operation panel & functions Page 8 - 13 How to use Page 14 - 15 Maintenance Page 16 - Troubleshooter Page 17 - Warranty &...

  • Page 3: Introduction

    Introduction Thank you for purchasing the Magnum MFM-LF Letter Folding System. This system enables users to achieve greater efficiency in clerical work by releasing them from paper-folding work that has manually been performed in the past. Please read these instructions carefully before starting to use the system to ensure you get the best results and are competent at operation.
  • Page 4 Safety Instructions • Make sure that the system is electrically grounded. This prevents an electric shock when there is a leak of electricity. • Use the system at 110 – 120 VAC, 220 – 240 VAC with a frequency of 50Hz to 60Hz. A fire may start or the system may break down if a higher or lower voltage is used, or if an electric current with a frequency that is not within the range of frequency stated above.

  • Page 5: Information Before Use

    Information Before Use 1. Precautions on Installation Do not install it in an unstable place such as on a faltering bench or an inclined place. It may fall down or drop and cause an injury. Do not install it in a dusty place or a place of high humidity. It may cause a fire, or an electric shock.

  • Page 6: Parts

    Parts   Number Name Number Name Manual feed cover (10) Fine adjustable knob Right cover (near control panel) (11) Feed roller Control Panel (12) Left cover Side guide (13) Power inlet Auxiliary feed table (14) Fuse holder Extension feed table (15) Power switch Lower plate...

  • Page 7: Operation Panel & Functions

    Operation Panel and Functions Number Name Function Count display Displays number of folded sheets. Lights up when power is on. Indicator lights RUN: lights up means machine is running. NONE: lights up means sheets run out or plates are not well positioned. JAM: lights up means there is a jam.
  • Page 8 How to Use 1. Install the upper plate. Insert the upper plate along the guide line as far as possible, and seats on the support pins A B as shown.   The lower plate is inserted in different directions for single fold and other folds. Make sure both upper and lower plates are seated firmly in position.
  • Page 9 2.2 For Letter fold, Z fold, and double fold. Insert the lower plate along the guide line as far as possible and seats on the support pins C E at the cutout. 3. Operation (1) Connect the power supply. Connect the power cord. Turn on the power switch.
  • Page 10 4. Correct Fold Misalignment. Moving the fold stop if misalignment is serious: move inside if A or B is longer, move outside if A or B is shorter. DO NOT touch any moving parts during operation. DO NOT let long hair, necktie etc. hang above the machine or near to moving Parts.
  • Page 11 5. Automatic mode 5.1 Turn on the power switch. 5.2 Position the fold stop referring to the folding instruction. 5.3 Pull the ejection tray out. 5.4 Open the auxiliary feed table and pull out extension feed table. 5.5 Feed paper. •...
  • Page 12 • Do not let folded paper exceed the max stack line. • Make sure the sheets to be fed are clean and easily folded. • Pull out the ejection stack the length a little longer than that of sheets folded. Take the sheets out of the ejection stack in time, so the stacked sheets won’t exceed the max line, which may cause a jam.
  • Page 13 6. Manual Feeding (bypass) mode Close the auxiliary fold table before use manual feeding mode. DO NOT insert more than 3 sheets at a time. DO NOT insert paper weight more than 60 lbs / 150gsm. DO NOT insert paper with staples. 6.1 Turn on the power switch.

  • Page 14: Maintenance

    Maintenance 1. Regular Clean Paper dust and ink accumulate on some parts during use, which may result in dirty paper and misfeeding. Make sure you have turned off the power before cleaning. 1.1 Clean the paper separator. 1.2 Remove upper & lower plate, open manual feed cover. 1.3 Remove the feed roller by pushing is aside and disengaging the other end.
  • Page 15 2.3 Push till one end is disengaged with the machine, lift the other side and remove   the feed roller shaft. 2.4 After replacement, repeat the procedure in the opposite sequence. For other parts, please contact your dealer.

  • Page 16: Troubleshooter

    Troubleshooter No power present Ensure plug is fitted correctly...

  • Page 17: Warranty & Incorrect Use

    IMPORTANT INFORMATION Your Magnum Folding Machine should reach you in perfect condition, however please retain all of the original packaging once you have unpacked your Folding Machine in case you need to return it for repair. If your machine arrives damaged or faulty in anyway, this must be reported to your supplier immediately.

Table of Contents