Table of Contents
Advertisement
Available languages
Available languages
PLAYBACK
1)
Set the "FUNCTION" selector to "CD / MP3 / USB" mode.
2)
Open the CD door and place a CD / MP3 disc with the label up in the CD compartment.
3)
Close the CD door.
4)
Focus search is performed if disc is inside.
For CD disc - Total number of tracks is read and appears on the display.
For MP3 disc - "MP3" appears on the display.
5)
Press the "PLAY / PAUSE" button to start playing CD / MP3 disc.
6)
Adjust the "VOLUME" control to the desired level.
7)
Press the "PLAY / PAUSE" button again when you want to stop playback temporarily.
8)
Press the "STOP" button when finished.
CD / MP3 OPERATION
PROGRAM
Up to 20 tracks of CD disk, 99 tracks of MP3 disc can be programmed for disc play in any order.
Be sure to press the "STOP" button before use.
1)
Press the "MODE" button, the display will show "P01" and "MEMORY".
2)
Press the "ALBUM +" button to select folder. (For MP3 only, folder select function can only
operate if disc store with at least 2 directories / files. )
3)
Select desired track by using the "SKIP +" or "SKIP -" button.
4)
Press the "MODE" button again to confirm desired track into the program memory.
5)
Repeat step 2 to 4 to enter additional tracks into the program memory.
6)
When all the desired tracks have programmed.
Press the "PLAY / PAUSE" button to play the disc in the order you have programmed.
7)
Press the "STOP" button twice to terminate programmed playback.
MODE
Press the "MODE" button during playing CD / MP3 disc, each press switches the repeat function
as follows:
1)
REPEAT 1
2)
REPEAT ALL
3)
REPEAT FOLDER (For MP3 only)
4)
RANDOM
5)
INTRO
6)
NORMAL PLAYBACK
EN - 35
EN
Advertisement
Table of Contents
