Page 2
Dear Customer Thank you for purchasing the HANSS ACOUSTICS T-30 turntable. Please read the following manual carefully and in detail before beginning the setup. Silicon Belts Aluminum Platter Record Clamp Stroboscope Disc Synchronized Motor(2PCS) Bearing Housing Chassis AC Power Cords...
Page 3
Magnetic Suspension Low Friction Bearing Slow pitch VTA Anodized aluminum platter SME Arm AC Motor Speed controller (SC-30) Magnetic Suspension Feet GRS Mete Anti-resonance acrylic/aluminum sandwich SC-30 33.3rpm/45rpm Selector 33.3rpm 45rpm ON/OFF Adjustable Adjustable Page 2...
Page 4
T-30 is equipped with GRS meters and to ensure accurate operation Please do not do the followings 1. Do not remove the reflective tape on the bottom of the platter otherwise the GRS meter will not operate. 2. Do not use the SC-30 for operations other than HANSS ACOUSTICS turntables.
Page 5
Installing the Battery for GRS meter Take the chassis out from the protective packaging and locate the small battery compartment under the chassis. Unscrew and plug in the 9V battery. Leveling the turntable to match your rack Place the turntable on a stable surface along with the supplied bubble level meter and height adjustable feet for the initial leveling.
It is very important to level the turntable before any adjustments. Therefore please position the T-30 on a stable surface which would be suitable for the operation. Please make use of the bubble level meter to get he turntable on the horizontal level as possible.
Page 7
Now plug it into your AC wall outlet for operation. SPEED AUJUSTMENT USING TH GRS METER & SC-30 T-30 is equipped with a GRS meter (PictureA) and SC-30 speed controller. Both can be used in conjunction to calibrate the speed of motor to an accurate setting for both 33.3rpm and 45rpm playback.
Each HANSS ACOUSTICS distributor is responsible to honour the warranty during this time. Any unauthorized servicing or modification of the equipment shall immediately voids the 2 years service warranty.
Need help?
Do you have a question about the T-30 and is the answer not in the manual?
Questions and answers