Sinclair RG51Q/BGC User Manual page 6

Function buttons(continued)
SET TEMPERATURE( C)
FAN
AUTO
HIGH
COOL
MED
DRY
HEAT LOW
TEMP
ON/OFF
MODE
FAN SPEED
SWING TIMER ON
TIMER OFF
RESET LOCK
RG51J(1)/(C)E
SET TEMPERATURE( C)
AUTO FAN
HIGH
COOL
DRY MED
HEAT LOW
ADJUST
ON/OFF
MODE
FAN SPEED
TIMER ON
SWING ECO
TIMER OFF
SWING
RESET C/H
AIR
DIRECTION
RG51Q1/BG(C)E
9 TIMER ON Button
Press this button to activate the Auto-on time
setting. Each press will increase the time setting
in 30 minutes increments, up to 10 hours, then at
1 hour increments up to 24 hours. To cancel the
Auto-on time setting, just press the button until
the time setting is 0.0.
10
ECO Button
Select this function during the sleeping time. It
can maintain the most comfortable temperature
and save energy. This function is available on
COOL, HEAT or AUTO mode only .
NOTE: While the unit is running under Energy-
saving mode, it would be cancelled if press
MODE, FAN SPEED or ON/OFF button.
TIMER OFF Button
11
Press this button to activate the Auto-off time
setting. Each press will increase the time setting
in 30 minutes increments, up to 10 hours, then at
1 hour increments up to 24 hours. To cancel the
Auto-off time setting, just press the button until
the time setting is 0.0.
12
LOCK Button
Press this recessed button to lock all current
settings, and the remote controller will not accept
any operation except that of the LOCK. Use the
LOCK mode when you want to prevent settings
from being changed accidentally. Press the LOCK
button again to cancel the LOCK function. A lock
symbol will appear on the remote controller display
when the lock function is activated.
NOTE: For RG51Q1 models, press the TEMP
UP( ) and DOWN( ) button simultaneously
for 3 seconds to activate/cancel the LOCK
function.
C/H Button
13
Press this recessed button to shift the mode
between Cooling only and Cooling & Heating
13
according to the feature of the machine . The
factory default setting mode is Cooling & Heating.
For example, the unit you purchased is Cooling
only models, please press this recessed button
with a needle of 1mm to shift the operation mode.
5
(For RG51Q and RG51J models only)
(For RG51Q1 models only)