Table of Contents
Advertisement
Menu Operation Method
• This section describes only the menu operation method. Please see this item should you need information while
performing menu operations.
• For information about a menu function, adjustment, or setting, please see one of the pages containing such descrip-
tions.
• Adjustments and settings are made by projecting an image and adjusting to an optimum condition.
• The remote control should be pointed toward the remote control sensor of the projector and operated.
• To return the various items that have been changed via the menu to their standard values (i.e., default values at time
of shipping from the factory), see "Factory Default" on Page E-55. (Some items will not return to their initial values.)
• The adjustment/setting items and contents will differ depending on the input selection and the adjustment/setting
items that can be used with the input signal are displayed on the menu.
Names and functions of remote control unit buttons used for menu operations
The buttons on the main unit operate in the same way.
ON
STANDBY
FREEZE
MUTE
PC
PC-CARD
VIDEO
S-VIDEO
QUICK
ASPECT
ENTER
ZOOM
SELECT
ENTER button
MENU button
Used to display menus, to
return to menu name selec-
tions, and to close menus
(i.e., closing sub menu dis-
plays).
OFF
LAMP MODE
MENU button
Used for menu display and menu closure.
CANCEL button
Used to return to menu name selection as well as to close
AUTO
the menu (and the sub menu display).
SELECT
Used in the selection of menu names and item names as
well as in setting and adjusting the item contents.
ENTER button
Used to set the verification display.
VOL
+ / – buttons
Used to set or adjust the item contents
Have the same functions as the SELECT
SOURCE
buttons
MENU
[Main unit buttons]
buttons
E-33
AUTO
QUICK
MENU
buttons.
Advertisement
Table of Contents
