1. Manuals
  2. Brands
  3. TEQ Manuals
  4. Receiver
  5. WiH130
  6. User manual

TEQ WiH130 User Manual

Wireless hdmi connection system
Hide thumbs
1
2
3
Table of Contents

Advertisement

Quick Links

Download this manual
WiH130 User Guide
WiH130 - Wireless HDMI Connection System
(Mini Transmitter & Receiver Kit)
Thank you for purchasing this Wireless HDMI Transmitter & Receiver Kit. Please read the following instructions carefully for your safety and prevention of
property damage.
 Do not use the product in the extreme hot, cold, dusty or humid environment.
 Avoid the product dropping down to avoid damage to hardware.
 The product is not water proof so do not allow any liquid to enter the unit.
 Do not wipe the surface of the product with alcohol, benzene or thinners.
 Do not dismantle, assemble or alter the product arbitrarily.
 When the product is operating, the surface temperature will increase slightly. This is normal.

Introduction

WiH130 is a Wireless HDMI Mini Transmitter & Receiver Kit that delivers uncompressed HD video/audio 20 meters in open field. This device kits make wireless
connection from HD Media Source Devices such as Blu Ray Disc Player, PC, Game Console, Set-top Box to Display Devices like LCD, Plasma or LED TV,
Projector... while keep wire-equivalent quality and no latency.

Features

 Extends HDMI or DVI signals over Wireless connection
 Supports Full HD 1080p signals.
 Real-time compressed audio is embedded within the HDMI output stream.
 No latency transmission for high quality playback.
 Supports point-to-point transmission within 70-ft (22 m)

Product Overview

WiH130 Mini Transmitter Unit (TX)
WiH130 Receiver Unit (RX)

Installation

Notes:
Each TX/RX after pairing supports only point to point operation. It does not support multi-source broadcasting by wireless connection. The Rx receiver
can be placed horizontal or vertical position, depending on your requirement, however for optimum performance it is recommended to operate in vertical position.
Before starting the installation, please ensure that all devices are powered off. The following steps are for an installation using HDMI equipment, if you are using
DVI equipment you should substitute the HDMI cables for DVI to HDMI cables where required.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WiH130 and is the answer not in the manual?

Questions and answers

Summary of Contents for TEQ WiH130

  • Page 1: Product Overview

    Introduction WiH130 is a Wireless HDMI Mini Transmitter & Receiver Kit that delivers uncompressed HD video/audio 20 meters in open field. This device kits make wireless connection from HD Media Source Devices such as Blu Ray Disc Player, PC, Game Console, Set-top Box to Display Devices like LCD, Plasma or LED TV, Projector…...

  • Page 2: Remote Control Operation

    3. Connect the power adapter (included) to the DC-IN port of the Receiver. Connect USB port on source to DC-IN port of the transmitter. Once all equipment is turned on, the WiH130 Tx and Rx will initiate a Wireless link. Successful connection of the link will be shown by the blue Wireless Link LED on both the Transmitter and Receiver.

  • Page 3: Specifications

    If the Transmitter and/or Receiver are positioned horizontally move them to the vertical position. Switch both Extender units off and back on. Reduce the distance between the Transmitter and Receiver units and then switch both WiH130 Tx and Rx units off and back on.

Table of Contents