Table of Contents
Advertisement
506-0331-100
SECTION V
PARTS IDENTIFICATION
5.1
SPARE PARTS ORDERING INFORMATION
This section describes the replaceable parts in your
tape unit which are available only from Kennedy
Company. Many parts of the unit are common
c~m
mercial parts and can be obtained locally from the"
manufacturer.
These parts are marked with the
manufacturer's name and part number and are not
listed herein.
The serial number and part number of the tape unit
are the keys to numerous engineering details applying
to your unit. These numbers are found on the serial
number tag located on the right side panel or deck
underside. When ordering spare parts, accessories,
or tools always specify the serial number and part
number of your unit.
Changes to Kennedy units are sometimes made to
accommodate improved components as they become
available and to give you the benefit of the latest cir-
cuit improvements developed in our engineering de-
partment.
If a part you have ordered has been re-
placed by a new part, a Kennedy representative will
contact you concerning any change in part number.
All part orders should be addressed directly to
Kennedy Company, Parts Order Department, 540
West Woodbury Road, Altadena, California 91001,
telephone (213) 798-0953, TWX 910-588-3751.
5.2
IN-WARRANTY REPAIR PARTS
ORDERING INFORMATION
Repair parts for in-warranty units are made available
on an exchange basis through the Kennedy Company
Customer Engineering Department.
The serial number and part number of the tape unit
are necessary to insure shipment of. the proper re-
placement parts.
5-1
All inquiries should be directed to Kennedy Company,
Customer Engineering Department, 540 West Wood-
bury Road, Altadena, California 91001, telephone
(213) 798-0953,
TWX
910-588-3751.
5.3
EXPORT ORDERS
Customers outside the United States and Canada are
served by Kennedy Company international sales
agents. All correspondence regarding your tape unit
should be directed to your sales agent. If you pre-
fer, correspondence may be addressed directly to
Kennedy Company, Parts Order Department, 540
West Woodbury Road, Altadena, California 91001,
TWX 910-588-3751, cable KENNEDYCO.
5.4
ILLUSTRATED PARTS LIS)
To assist in parts identification, an illustrated parts
list is included in this section with references to
photographs of the machine.
All major parts are
shown but those considered replaceable are indica-
ted by the first three digits of the part number being
198.
These items are listed again in the replace-
able parts list.
5.5
FIELD KITS
Some replacement components may be supplied in the
form of repair or field change kits. The repair kits
contain parts that are matched or assembled and ad-
justed at the factory because of complexity or to aid
the field technician. Components ordered as field
kits either by correspondence with Kennedy service
engineers or by direct order will be supplied with
complete installation instructions. The change kits
are intended for standard or special options not
originally included in the unit.
Advertisement
Table of Contents
