Basic Connections; Projector + Av Equipment; Projector + Dvd Player Or Hdtv Decoder - Mitsubishi S490 User Manual

Basic connections

This projector can be connected to equipment such as VCRs, video cameras, videodisc players, and personal com-
puters having analog RGB output.
Important:
• Make sure that your equipment is turned off before connection.
• Plug in firmly and unplug by holding the plug, not by pulling the main power cable.
• If connected units are set too close to one another, the image may be affected.
• Refer to the owner's guide of each component for details of connections.

Projector + AV equipment

Important:
• Match the color of video and audio plugs on the AV cable with the connections.
• S-video signals take priority over video signals. If you input both S-video signals and normal video signals at
the same time, the normal video input automatically is inhibited.

Projector + DVD player or HDTV decoder

Some DVD players have output terminal for 3 line fitting (Y, C
connect to COMPUTER 1 IN or COMPUTER 2 IN of the projector.
DVD player or HDTV decoder
• Y, P , P is an example of the terminal names for a HDTV decoder.
B R
• The terminal name is different depending on the connected equipment.
• Use mini D-SUB 15 pin-BNC conversion cable for connection.
• Some DVD players may not project the image correctly.
• When connecting with HDTV equipment which has R, G, B output, select RGB for the COMPUTER INPUT in
the SIGNAL menu.
• Change the setting in the SIGNAL menu, when 525p signal is inputted. (Refer to pages 29 and 30).
• Set the INPUT SELECT switch on the terminal board to ANALOG. (For X500U only)
EN – 10
USB
INPUT SELECT RS-232C
COMPUTER 1 IN AUDIO 1 IN
REMOTE
VIDEO 1 IN VIDEO 2 IN
DIGITAL
ANALOG
COMPUTER 2 IN AUDIO 2 IN
S-VIDEO
MAIN
VIDEO
O I
COMPUTER OUT AUDIO OUT
AC IN
L
AUDIO
R
VCR etc.
to AUDIO OUT
Y C (P ) C (P )
B B R R
No connection
HD/CS
G B R
Mini D-SUB 15 pin-BNC
conversion cable (optional)
Connect either one of these.
to S-video input
to video input
to audio input
to video output
to audio output
to S-video output
, C ). When connecting them to the projector,
B R
AUDIO cable
BNC - RCA connector
(optional)
VD
to COMPUTER
IN (Mini D-SUB
to COMPUTER
AUDIO IN
INPUT SELECT RS-232C
COMPUTER 1 IN AUDIO 1 IN
REMOTE
VIDEO 1 IN VIDEO 2 IN
DIGITAL
ANALOG
COMPUTER 2 IN AUDIO 2 IN
S-VIDEO
MAIN
VIDEO
O I
COMPUTER OUT AUDIO OUT
AC IN
L
AUDIO
R
15P)
USB