Vehicle Washing - Yamasaki YM50-8B User Manual

Vehicle Washing

Cleaning the vehicle reularly can slow down the color fading of its body and make it easier to check if there is
any damage and oil leakage with if.
Caution:
Washing the motorcycle with over-pressurized water may cause damage to some of its components. Therefore,
do not jet over-pressurized water directly on to the following parts:
Wheel hub
Exhaust pipe
Fuel tank and lower portion of cushion
Carburetor
Head lock and ignition switch
Meters
(1) After pre-wiping ,the vehicle should be washed with clean water to remove dirty residues so as to prevent
corrosion. Plastic subassemblies should be cleaned by wiping with cloth or foam soaked in neutral detergent
solution, followed by washing with clean water.
(2) After the cleaned vehicle is air dried, grease the chain and run the engine at idling speed for a few minutes.
(3) Prior to driving, carefully check the braking system repeatedly and repair or adjust it if necessary.
20