Advertisement
1 IN PUT:
Connect the input jack to your instrument or Send jack of amp which has FX
loop. The circuit is automatically turned on when a plug is inserted.
2 OUT:
Connect the output jack to your amp input or Return jack of amp which has FX
loop.
2. GAIN:
The amount of gain adjusts.
3. TONE:
The amount of high frequency contour controls. Adds bite to the sound or makes
it mellower.
4. VOLUME:
The level of the distorted signal, but does not effect the normal signal. When
switching the effect in and out, it is useful for matching the distortion level to the
normal level.
5 LED of ON/OFF:
Indicator comes on when effect is on. If it is dim or does not light, replace the
battery.
6 EXT D.C. :
When using external D.C. supply, internal batteries are switched off.
For more information about our products, please look at our website
http://www.kldguitar.com
Advertisement
