Panasonic Lumix DMC-FZ330 Basic Operating Instructions Manual page 58

Others
Pictures cannot be transmitted to the computer.
• If a firewall is enabled by the OS or security software, this unit may be unable to connect to the
computer.
Transmission of the image fails midway. There is an image that could not be transmitted.
• Image cannot be transmitted when the battery indicator is flashing red.
• Is the size of the image too large?
→ Divide the motion picture using [Video Divide]. (→53)
→ Reduce the image size at [Size], and then send.
• File format of the picture that can be sent differs depending on the destination.
• Capacity or number of images in the WEB service is full.
→ Login to "LUMIX CLUB", and check the status of the destination on the WEB service link
settings.
Cannot play motion pictures on TV.
• Card is inserted into TV.
→ Connect with AV cable (optional) or HDMI micro cable and play on camera.
VIERA Link (HDMI) is not working.
• Is the HDMI micro cable connected correctly?
→ Check that the HDMI micro cable is fully inserted.
• Is the camera's [VIERA Link] setting set to [ON]?
→ The input setting may not be able to be changed automatically with certain television HDMI
sockets. In this case, please change the input setting with your television's remote control
(consult your television's operating instructions for details).
→ Check the VIERA Link (HDMI) settings on the device you are connecting to.
→ Turn the camera off and on again.
→ Turn the "VIERA Link control (HDMI device control)" setting on your television (VIERA) to off and
then to on again. (Consult your VIERA's operating instructions for details.)
The lens makes a clicking noise.
• When the camera is turned on or off, the lens is moved, or an aperture operation is performed,
such a noise may be heard. This is not a malfunction.
• When the brightness changes after a zooming operation or moving the camera, the lens may make
a noise while adjusting the aperture. This is not a malfunction.
Zooming stops instantaneously.
• When using the Extra Optical Zoom, the zooming action will stop temporarily. This is not a
malfunction.
Camera is hot.
• Camera may become a little warm during use, but this does not affect performance or quality.
Clock is incorrect.
• If you do not use the camera for a long time, the clock may be reset.
→ Reset the clock (→17).
58
SQT0962 (ENG)