Connecting Video Equipment With Component Video Signal (Ycbcr) Output - Mitsubishi LVP-X30U User Manual

Connecting Video Equipment With Component Video Signal (YCbCr) Output

• Video equipment with component video signal (YCbCr) output can be connected to this projector by setting the RGB/YCbCr connector to
YCbCr (see page 27) from the menu.
Connection to the RGB/YCbCr connector
To audio out jack
Audio adaptor (accessory)
Audio cable (accessory)
Rear panel jacks of this device
DVD player
(L) (R) (Y) (Cb) (Cr)
White Red Green Blue Red
AUDIO MOUSE RGB / YCbCr S-VIDEO
E – 11
To component video (YCbCr) OUT jack
Component cable (YCbCr cable: option)
Jacks: RCA 3 mini D-Sub 15-pin
Plug in the connection cable
VIDEO
and tighten the screws.