Advertisement

744
Liberty Town & Country II
User Manual
Thank you for your decision to buy this product.
Please use this product according to the instructions.
Please keep the instructions in a handy place.
Town & Country II
48 Volt Lead Acid
1
.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Town & Country II and is the answer not in the manual?

Questions and answers

Summary of Contents for Liberty Town & Country II

  • Page 1 Liberty Town & Country II User Manual Thank you for your decision to buy this product. Please use this product according to the instructions. Please keep the instructions in a handy place. Town & Country II 48 Volt Lead Acid...
  • Page 2: Introduction

    Introduction Dear Customer, Wow! You are excited! You have just received your brand new ebike. We, too, are excited because as designers and developers of our bikes, we love to make you happy, and we believe your new ebike will give you lots of fun. I know you want to get this bike on the road immediately, but please STOP! Why? Well, first of all, you need to charge your batteries fully before using them.
  • Page 3: Table Of Contents

    Table of Contents Introduction ....................... Table of Contents ...................... Assembly Instructions ....................General Operating Instructions ................. Riding Instructions ....................Battery Charging ....................... Important Instructions ....................Safety Precautions ....................Maintenance ......................Troubleshooting ......................Warranty ........................Federal Electric Bike Law ..................Rear Brake Lever Throttle Instrument Panel Optional Rear Trunk...
  • Page 4: Assembly Instructions

    Assembly Instructions 1. INSTALLING THE FRONT WHEEL 1. Showing parts for front wheel. 2. Sliding brake onto the hub. 3. Brake inserted into wheel. 4. Line up notch in brake with black rod. 5. Black rod aligned in aluminum notch. 6.
  • Page 5 INSTALLING THE PEDALS (Optional) Pedals are included in your purchase. Many do not install pedals on their Town & Country II, but in some locations, local or state laws require the installation of pedals to meet local laws or restrictions. The pedal assembly includes two CRANKS (one marked with L and one with R).
  • Page 6 Position metal plates inside of rear box as shown here. Please fix the four screws tightly with tool. 4. INSTALLING THE MIRRORS AND WINDSHIELD (Optional) The windshield is an option that is installed when installing the rear view mirrors. Install the channel brackets underneath the nut that holds each of the rear view mirrors. The channel is the receptor for the L-bolt (shown in picture #2).
  • Page 7: General Operating Instructions

    the wheels with the adjustable bolts. Rear brake adjustment is shown below. See assembly instructions for front brake adjustments. Adjusting Upper Adjuster Nut General Operating Instructions BEFORE YOU RIDE 1. Charge your battery until the green indicator light on the charger comes on. 2.
  • Page 8: Riding Instructions

    While running, if the battery power is getting low, the battery meter will lessen. At this time you should pedal your ebike like a regular bike and charge the battery as soon as you get to an electrical outlet. Turn off the power and remove the key while parking.
  • Page 9: Battery Charging

    •While charging, put the battery in a secure place where children can't reach. •Do not use any charger other than the one that came with your Liberty Electric Bike. If you need another charger, contact your local dealer.
  • Page 10: Important Instructions

    Important Instructions Safeguard your battery to insure continued high performance. It should be recharged after each use. The normal full-cycle battery life, if it is continuously discharged and recharged, is between –1000 cycles (depending on which battery came with your bike) which the storage capacity of the battery will gradually decline.
  • Page 11: Safety Precautions

    Safety Precautions • Before operating your bicycle, inspect it carefully to avoid accidents or damage. • Do not drive close to other vehicles. • ALWAYS keep the power switched OFF until you are seated on the bike and ready to ride. Turning the power on and then accidentally twisting the throttle can result in the bike lurching forward and may cause an accident, damage, or injury.
  • Page 12: Maintenance

    MAINTENANCE Wheels: Wheels should be properly placed in the fork or dropouts. If you hear any irregular noise from the wheels or brakes, they should be checked and adjusted. The wheels should rotate smoothly without wobbling from side to side. Check the bearing play of the hubs regularly by lifting the bicycle and spinning the wheel. It should continue to spin for several turns after you stop spinning the wheel.
  • Page 13: Troubleshooting

    If “zero” voltage on the charger, then it needs to be replaced. If “zero” voltage from the battery, then check the fuse. If all above mentioned situations are normal, then there is some other problem. Please call your local Liberty ebike dealer.
  • Page 14: Warranty

    We will repair or replace, at our option, any product or part that is defective in material or workmanship without charge if the product is presented to us at our authorized Liberty Electric Bike Service Center at 1-800-806-7109 with dated proof of purchase inside of warranty period.

Table of Contents