Cautions Disposal of the old appliance Before disposing an old appliance, please make sure it’s inoperative and safe. Unplug the appliance and remove or destroy all of the springs, latches, or bolt-locks in order to avoid the risk of child entrapment. It must be noted that the refrigeration system contains insulating gases and refrigerants, which require specialized waste disposal.
Refrigerator Diagram ① ② 1.Control Panel 2.Drawers This diagram may vary slightly with the layout of the refrigerator you have just purchased due to technical improvements.
Preparation Unpacking Remove all packing materials. Check attachments and materials Checking should be conducted with reference to the Packing List. Contact the local distributor if discrepancies are found. Ensure proper location of the freezer Clean the refrigerator before use. (See the following section “Cleaning”) Idle time After the refrigerator has been sited and cleaned, let it stand for more than 30 minutes before connecting the power source.
DOOR REVERSAL 1. Unplug the appliance before reversing the door opening direction. 2. Remove food from the appliance. 3. Remove caps on the front of the refrigerator body (Fig. 1, Fig 2). 4. Remove the two screws, which attach the upper hinge to the appliance door (Fig. 3). Take spe- cial care and hold the appliance door vertically.
1. Thermostat Dial The thermostat automatically keeps the internal temperature at a constant level. The temperature is regulated by the thermostat dial, located on the freezer control penal. To change the temperature, turn the dial anti-clockwise from 1 (highest temperature) to 5 (coldest temperature).
If you have any problems with your appliance, you should check the troubleshooting prior to calling Customer Care to prevent unnecessary service calls and potential cost. If the appliance is not working • Check there is power to the appliance: •...
Page 11
Ship It Appliances Ltd Unit A, Millennium Business Park Enterprise Road, Mansfield Nottinghamshire UK NG19 7JX Tel: 01623 625658...
Need help?
Do you have a question about the RFU103 and is the answer not in the manual?
Questions and answers